ICOM M802 DIGITAL MARINE SSB RADIO

Standard 4×8 remote controller

The IC-M802 offers an industry-standard 4-inch tall (10.16 cm) remote controller. When set up with the IC-M502 VHF radio, Icom offers you a complete communications station.

Large LCD with dot matrix characters

You can easily read the alphanumeric name of any of the 1355 ITU channels at a glance with the large LCD display. Nighttime operation is no problem with 10 levels (plus OFF) adjustable backlit display and keypad.

Easy to use in all conditions

The IC-M802 offers two large dials – bank and channel – for easy channel selection. Up to 16 banks of 20 (max.) each for user channels, and 17 banks for ITU channels are available.

Built-in digital selective calling

For added safety at sea, the IC-M802 offers the latest in one-touch DSC emergency communications technology. (ITU Class E standard.) The emergency button is covered by a red, spring loaded hatch to avoid accidental DSC activation.

Digital signal processor advantage

The speech compressor, utilizing DSP, increases average talk power. Flexible filter settings provide for narrow band signals like e-mail, SITOR, FSK and other operation without an optional filter.

150W (PEP) of powerful output

150 Watts of power offers superior worldwide communications. A one piece, die cast aluminum chassis and a large cooling fan allow continuous transmission at full output power– very important for data communications, like e-mail.

One-touch e-mail access

An SSB first! The IC-M802 can be set to memorize your HF e-mail access frequency, mode and bandwidth settings. At sea e-mail has never been easier.
* Please consult with an HF e-mail provider for details.

Automatic antenna tuner, AT-140

An optional automatic antenna tuner, AT-140, easily connects to the IC-M802. When the tuner cannot tune the antenna, the IC-M802 bypasses the tuner and displays a warning indicator on the LCD.

Other features

• Wide band receive coverage (0.5 – 29.9999MHz)
• Remote control mic allows you to select channels directly
• Accessory RS-232C port allows connection of modem, etc.
• GPS input, NMEA 0183 version 3.01
• A headphone jack in front of the controller

General
Frequency coverage Rx Tx	(unit: MHz) 0.5– 29.9999 (continuous) 1.6– 2.9999, 4.0– 4.9999, 6.0– 6.9999 8.0– 8.9999, 12.0– 13.9999, 16.0– 17.9999 18.0– 19.9999, 22.0– 22.9999, 25.0– 27.5000
Type of emission	J3E (SSB), J2B (AFSK), F1B (FSK), A1A (CW), H3E (AM*) *Rx only
Number of channels	1355 (max.) (160 programmable channels; 249 ITU SSB duplex; 72 ITU SSB simplex; 662 ITU FSK duplex; 160 e-mail; 21 ITU 4MHz simplex; 31 ITU 8MHz simplex)
Antenna impedance	50Ω (SO-239)
Power supply requirement	13.6V DC ±15%
Max. current drain (at 13.6V DC)	Tx (Max. power) 30A (typ.) Rx (Max. audio) 3.0A
Operating temp. range Guaranteed range	–30°C to +60°C; –22°F to +140°F –20°C to +55°C; –4°F to +131°F
Frequency stability	±10Hz (at –20°C to +55°C)
Dimensions Main unit Controller Speaker	240×94×238.4mm; 97⁄16×31116×93⁄8in 220×110×84.4mm; 821⁄32×411⁄32×35⁄16in 110×110×84.4mm; 411⁄32×411⁄32×35⁄16in
Weight Main unit Controller Speaker	4.7kg; 10.36lb 570g; 1.26lb 370g; 0.81lb

Transmitter
Output power	150, 60, 20W PEP (Selectable)
Spurious emissions	–62dB
Unwanted sideband	55dB
Carrier suppression	40dB
Microphone impedance	2.4kΩ

Receiver
Sensitivity (at 10dB S/N)	J3E, A1A J2B, F1B H3E DSC (J2B) 0.5 – 1.5999MHz 6.3µV — 32µV 0.5µV (at 1% error rate) 1.6 – 1.7999MHz 0.89µV 0.89µV 6.3µV 1.8 – 3.9999MHz 0.5µV 0.5µV 3.2µV 4.0 –29.9999MHz
Spurious response rejection ratio	Tx/Rx (1.5-29.9999MHz) More than 70dB DSC (Except 1st IF image) More than 50dB DSC (1st IF image) More than 60dB
Audio output power	4.0W at 10% distortion with a 4Ω load
Audio output impedance:	4–8Ω
Clarity variable range	±150Hz
GPS interface	NMEA 0183 version 3.01

All stated specifications are subject to change without notice or obligation.

Supplied accessories

• Separation cable, OPC-1106 (5m; 16.4ft)
• Hand microphone, HM-135
• External speaker, SP-24
• Mounting bracket kits
• Microphone hanger
• DC power cables
• ACC plugs
• Spare fuse

System Overview

• AT-140 HF AUTOMATIC ANTENNA TUNER
  Matches the transceiver to a long wire antenna with little insertion loss. Cable connections are easy to install. AT-130 is also available.
• MN-100 ANTENNA MATCHER
  Match the transceiver to a dipole antenna. Covers all HF bands from 1.5 to 30MHz. Two 8m (26.2ft) antenna wires come attached.
• MN-100L ANTENNA MATCHER
  Match the transceiver to a longwire antenna. Covers all HF bands from 1.5 to 30MHz. A 15m (49.2ft) antenna wire comes attached.
• OPC-1147/N SHIELDED CONTROL CABLE
  10m (32.8ft) shielded control cable connects between AT-140 and transceiver. OPC-1147N is for use with AT-140 Version 36.
• HM-135 HAND MICROPHONE
  Water resistant, remote function mic. Same as supplied.
• MB-75 FLUSH MOUNT KIT
  For mounting the controller or speaker to a panel.
• SP-24 EXTERNAL SPEAKER 4×4-inch external speaker. Same as supplied. Input impedance: 4Ω. Max. input power: 7W.
• AH-710 FOLDED DIPOLE ANTENNA
  Covers 1.9 to 30MHz band. Has an SO-239 connector and 30m (98.4ft) coaxial cable. Easy to assemble (non-kink construction).
• RC-25 REMOTE CONTROLLER
  Remote controller head. Same as supplied.
• OPC-1106 SEPARATION CABLE
  5m (16.4ft) separation cable between controller and main unit. Same as supplied.

Some options may not be available in some countries. Please ask your dealer for details.