No Promo Rate can be
applied on this item due to Oversize. Ship via UPS Ground Rate
Installing both radar and satcom antenna onto your powerboat?
Mount the two antennas together on one space saving mount and remove the need
for an additional 'empty' satcom dome to balance the look of your install.
Installing the satcom antenna above the radar eliminates antenna interference
and ensures maximum performance from both applications.
Options for Installing
Alternative design for open array installations – enables clearance as array
Pre-fitted IP65 gland to seal cable entry into stem and a watertight base
seal included so no need for messy sealant.
Ease of Install
Pre-drilled mounting holes, the antenna fastens to PowerTower top plate using
own mounting bolts.
Smaller satcom antenna? Keep your installation as compact as possible using
our Compact Dual PowerTower.
DPT-40-SO3 – Dual PowerTower® for 40cm satcom + 4' open
DPT-60-SO3 – Dual PowerTower® for 60cm satcom + 4' open
Gantry Mount for Dual PowerTower®
SC114-40 – Gantry Mount for Dual PowerTower® (30/40cm satcom/tv)*
SC114-60 – Gantry Mount for Dual PowerTower® (60cm satcom/tv)
*Not compatible with Furuno SC50 or Simrad TV45 / 46 or Raymarine 33 STV /
KVH M1 / Intellian i1 or Fleet Broadband 150/250 domes.
Pre drilled to fit Perko 100/200, Aqua Signal 25 & 40 series lights, Hella
2984 series, Hella NaviLED Pro series (using NaviLED 360 surface mount)
Can I use an open array on the Dual PowerTower? If so, up to what size?
Yes open-arrays can be installed on the Dual PowerTower.
The profile of the mount is slightly different from the model used to install
radomes to allow for the array to rotate. You can see this from the product
photo gallery and also from the technical information.
Please note, you can only install up to 4’ open-array antenna.