Maxwell HRC-8 Windlass For High Test 5/16 inch Chain & 9/16 inch Line

HRC Rope/Chain Series

The compact HRC-6 and HRC-8 are Maxwell’s horizontal versions of the renowned Freedom 500 and 800 vertical rope/chain windlasses. The HRC-6 and HRC-8 are packed with new and proven features including the patented rode management technology developed for the Freedom.

Proven top performance in an independent test, the HRC will provide years of reliable use and customer satisfaction.

Features

Aesthetically pleasing above deck design, encapsulating the motor and drive in an IP66 rated watertight case, saving space below deck and allowing simple routine maintenance.
High-pressure die cast, marine-grade, alloy case is chromate passivated and polyester powder coated for unsurpassed marine protection.
Simple bolt down installation ensures effortless and rapid on-deck installation and set up.
Proven and patented pressure arm system, within a safe, enclosed design, guarantees trouble free rode transition from rope to chain.
Integrated composite nylon, through deck hawse pipe for ease of installation and smooth, snag free operation.
High efficiency spur gearbox incorporating a robust non-backwind mechanism.
High speed, jam free retrieval of rope and chain controlled from a remote panel mounted Up/Down switch.
Emergency freefall function in the event of onboard power failure.
High quality chrome finished and innovative chainwheels, constructed of marine-grade bronze, are suitable for use with 6 to 8mm (1/4” to 5/16”) short link chain and either 3 strand or 8 plait rope.
Heavy duty, dual direction motor incorporating new technology features, including integrated wiring for quick electrical installation, is easily removed for simple routine electric brush maintenance.
Trouble free transition from rope to chain by means of an innovative pressure arm system within a safer enclosed design.

Standard Equipment
Circuit breaker/isolator panel
Dual direction control system
Up/down remote control panel
Emergency free fall activation lever

Optional Extras
Auto Anchor Rope/Chain counter
AutoCleat
Foot switches

SPECIFICATIONS

Model	HRC-6	HRC-8
Maximum Pull	270kg 600lbs	410kg 900lbs
Chain Short Link	6mm/7mm 1/4"	6mm/7mm/8mm 1/4" - 5/16"
Rope Size (Nylon)* (3 strand or 8 plait)**	12mm 1/2"	12mm/14mm 1/2" - 9/16"
Line Speed (Anchor retrieval nominal 30kg)	33m/min 108ft/min	33m/min 108ft/min
Power Supply (DC)	12V or 24V	12V/24V
Motor Power	400W	600W
Circuit Breaker
Net Weight (Electric)	11.5kg 25lbs	11.5kg 25lbs
Hydraulic pressure
Hydrauilic flow
Net weight - Hyd

* refer to owners manual for rope size variations
** 8 plait recommended

DIMENSIONS

Model	HRC 6 and 8
A	256mm 10 1/8"
B	132mm 5 11/32"
B2	176mm 6 7/8"
C1	214mm 8 7/16"
C2	147mm 5 3/4
D
E (std deck clearance)	65mm 2 1/2"
F
G	230mm 9 1/6"
H
J	96.4mm 3 7/8

Important: Maxwell windlasses must be used in conjunction with a chain stopper and/or alternative snubbing device to take the load off the windlass while laying at anchor. The chain stopper and alternative snubbing system should also be used to secure the anchor in the fully raised position while under way.

***The price is subject to change at anytime without any notice

_______________________________________________________________________________
Dear Customer

We are proud to serve you with any assistance we can provide via email ask@wmjmarine.com or toll free number at
1-877-330-9758 for USA or (858) 720-0776 for International Customers.

You will find the vast choices of marine products including Marine GPS & Chartplotter (including Garmin GPS, Lowrance GPS, Raymarine GPS), Fish Finder ( Furuno Fishfinder, Lowrance Fishfinder, Humminbird Fish Finder ), Marine Radar, Marine Electronics, VHF radio, Marine Supply, Boat Part, Boat Autopilot, Windlass, Anchor Winch, Boat Steering, Bow Thruster, Downrigger, Life Raft, Trolling Motor from major brands.