RAYMARINE C90W SYSTEM PACK WITH C90W & DSM30 SOUNDER AND RAY55 VHF RADIO T62288

C90W (US Coastal Charts) Specifications

Name	Value	Notes
AIS
AIS Suppport	Support for class B AIS	Supports silent mode
Target Symbols	Sleeping, activated, selected, dangerous and lost
Target Information	AIS vectors, buddy tracking, safety critical data and full AIS data.
Collision Avoidance	Safe zones and safety messages
Alarms	Local alarm messages, lost targets
Chartplotter
Cartography	Embedded Navionics Cartographys: US Coastal (Lower 48 States)
	Compatible with Navionics Charts on CompactFlash cards
Chart Scaling	1/32nm (if cartographic detail is available) to 4000nm
Waypoints	3000 waypoints entered via cursor, lat/lon, range and bearing from present position or at boat’s position. 16 character name can be assigned. Waypoint symbols and groups. Additional storage available on CompactFlash cards.
Waypoint Transfer	Waypoints database via NMEA and CompactFlash cards. Software also available to convert waypoints to Excel file.
Man Overboard (MOB Mode)	Mark placed with course line; readout shows range, bearing, lat/lon of MOB and time elapsed since MOB.
Presentation Modes	Head up, Course up or North up (selectable True or Mag-netic) Relative, Autorange or True Motion Screen offset Radar or 3D synchronization
Routes	A route plan may contain up to 50 waypoints. Up to 150 routes can be stored in the units internal memory. Additional storage available on CompactFlash cards. SmartRoute to create a route from track history.
Track History	15 tracks with up to 3000 points in each can be stored in the units internal memory. Track optimization reduces number of points used or user selectable time or distance interval. Additional storage available on CompactFlash cards.
Radar/Chart Overlay	Radar image can be overlaid on all screen charts
Radar/Chart Synchronization	To synchronize radar range and chart scale
3D/Chart Synchronization	To synchronize 3D and 2D chart scales and orientation
Aerial Overlay	Overlay of aerial photography on the chart
AIS Overlay	Switch AIS symbols on/off. Display heading/speed vectors and ROT. View detailed AIS data, safety critical target data, ALR and SRM messages. Set up a safe zone.
Navigation Information	Own boats position in lat/lon, XTE, TTG and SOG/COG selectable. Bearing and distance to waypoint. Bearing and distance to cursor and ETA.
3D Presentation Modes	Active motion mode, planning mode, Adjust rotation and pitch, port, starboard, forward and aft view, multiple views, Vessel offset
3D Display	Declutter, Transducer cone, Depth scale, Waypoint name, Adjust exaggeration, 3D view locator
Fishfinder
Transducer	Transom-mount, in-hull or thru-hull options
Digital Sounder Modules	Compatible with the DSM30 and DSM300
Receiver Type	Patented Raymarine HD Digital receiver technology
Power Output	Dependant on Digital Sounder Module
Frequency	Dependant on Digital Sounder Module
Alarms	Fish Alarm, Fish Depth Alarm, Shallow and Deep Fish Limit
A-Scope Display	Displays Sonar Returns in real time
Bottom Coverage Display	Shows the diameter of the transducer beam where it meets the bottom.
Bottom Lock	Displays echoes directly above the bottom
Range Markers	Easily see how far the boat is from a target on the echo sounder screen
Target Detection	Sonar fish echo with target depth readout
Zoom	2,3,4x and user programmable Zoom Scales
General
Data Display Capabilities	GPS, Chartplotter, Fishfinder, Radar, External Video, CDI(Course Deviation Indicator), and customizable Data Bar display
Dimensions	C90W : 12.46" x 7.74" x 6.14” (316.4 x 196.5 x 155.9)	Depth measurement includes powercable
Display (LCD) Size	C90W : 9"
Display Colors	16.7M
Display Resolution	C90W: 800 x 480 pixels (wide VGA)
Display Type	Sunlight viewable color TFT LCD
Mounting Methods	Console mounting hardware included. Trunnion mounting kit sold separately
Operating and Non-Operating Temperature Limits	14°F to 122°F (-10°C to 50°C)
Power Consumption	32 Watts (typical)
Voltage Range	10.7–32 volts (12/24v nominal)
Waterproofing	CFR46/IPX6 standards
Weight	C90W: 8.5lbs (3.85kg)
Approvals CE - Conforms to FCC - Compliant with	Essential requirements of 1995/5/EC, 1989/336/EC. CFR47 Parts 2 & 80
Humidity Limit	up to 95% at 35°C non-condensing
Display Windows	Chart, Radar, Fishfinder, CDI, Video, Data, Weather and Engine Monitor
Screen Functions	Full, half and quarter screens available dependant on function. Also 3 window page with 2 x 1/4 page windows and 1 x 1/2 page window.
Illumination	Screen and keypad: 0 to 100% in 64 steps Day/Night Mode
Languages	English (US), English (UK), Italian, French, Spanish, German, Norwegian, Dutch, Swedish, Danish, Portuguese, Finnish, Icelandic, Chinese, Russian, Greek, Japanese, Korean
System Alarms	Alarm Clock, Anchor, Arrival, Deep, Shallow and Fishing Depth, MOB, Offtrack, Temperature, Timer
Navigation Alarms	Arrival Alarm, Offtrack XTE Alarm
GPS
GPS Type	Internal High Sensitivity Receiver
Channels	12
Frequency	1.575GHz (L1)
Sensitivity	-159dBm (tracking), -142dBm (acquisition)
SBAS Support	WAAS / EGNOS Compatible
Horizontal Position Accuracy	<=15 metres 95% typical (without SA), <= 5metres 95% with WAAS/EGNOS
Speed Accuracy	<=0.3kts
Antenna	Helical antenna for even sensitivity across all orientations
Instrument and Engine Data
Data Pages	5 pages available. Pre-defined (Navigation, Waypoint, Route, Fishing or Sailing) or user-configured
Data Available	Vessel position, active waypoint, TTG, VMG - Waypoint, depth, COG, SOG, heading, speed, set/drift, trip, log, ground log, ground trip, rudder, local time and date, sea temperature, app wind, true wind, VMG wind, ground wind XTE, compass, locked heading, w
Engine Pages	5 pages available. Pre-defined (engine, engine and fuel, fuel resources, engine and resources, twin engines or triple engine support) or user-configured.
Engine Data	Tacho, boost pressure, alternator, oil pressure, coolant temperature, engine hours, fuel level (tanks 1 & 2), fuel rate, total fuel, load
Interfaces
Network Configurations	Single or dual display configurations
SeaTalkhs Network	2 ports
	Supports 8 devices	Optional network switch required
NMEA interface	3 inputs (configurable baud rate)
	2 outputs
NMEA 0183 Input	GLL, GGA, GLC, GTD, VTG, BWC, BWR, RMA, RMB, RMC, XTE, VHW, HDG, HDM, HDT, DBT, DPT, APB, VLW, MWV, WPL, RTE, DSC and ZDA. Selectable to 4800, 4800 Navtex, 9600 Navtex or 38,400 AIS
NMEA Output - User selectable	APB, BWC, BWR, DBT, DPT, GGA, GLL, MTW, RMA, RMB, RMC, RSD, TTM, VLW, VHW, VTG, WPL, VHF/DSC and ZDA
Seatalk Interface	1 port
SeaTalk Input	Depth,SOG,COG, Position, Waypoint Number, Range/ Bearing, TTG, Boat Speed, Time, XTE, Heading, Wind, Data, Log/Trip, Pilot Status, Temperature, MOB and Cursor Position
SeaTalk Output	Cursor Data, Guard Zone and Navigational Data bridged from NMEA
SeaTalk2/NMEA2000	1 port	Also supports SeaTalkng (Next Generation data bus) connectivity. Adapter cables required for SeaTalkng and NMEA2000
Video Input	Composite Video (NTSC or PAL) Input (BNC connector)
NAVTEX
Alerts	Incoming message (selectable categories)
Message List	Sorting
Radar
Radar Support	Support for all Digital, HD Digital & Super HD Digital Radars
Image Type	Color Radar Support (HD & SHD Radars Only)
Range Scales (Range Rings)	1/8 (1/16) nm to 72 (12) nm dependant on scanner. Performance limited by scanner type and position.
Range Ring Accuracy	Better than +/- 1.5% of the max. range scale in use, or 22m (72 ft.), whichever is the greatest.
Bearing Accuracy	+/- 1°
Variable Range Markers	2 x VRM’s, readout nm, sm, km
Electronic Bearing Lines	2 x EBL’s, floating if required, resolution 1°
Bearing Scale	360° graduated at 10° intervals 2° small ticks 10° large ticks
Minimum Range	23m (25 yds)
Range Discrimination	23m (25 yds)
Presentation Modes	Head up, Course up or North up (selectable True or Mag-netic) Relative or True Motion
Scanner Control	Interference rejection, standby/transmit modes, pulse selection, Tune, Rain, FTC and Sea controls, with selection of manual or automatic control of gain, sea clutter and tune (Auto GST)
Compass Input	NMEA 0183 (required for fast heading data, suitable for MARPA), or SeaTalk
Waypoint Display	Create waypoints and target waypoint displayed with User control of symbols and groups
MARPA	Manual acquisition of up to 25 targets (dependent upon scanner type), automatic tracking, dangerous target alarms, safe zone, target history, true or relative vectors, CPA graphics and indication of target speed/ course, bearing/ range, CPA and TCPA.
Guard Zone Alarm	2 guard zones, selectable sensitivity level, audible alarm
Automatic Tuning	Auto control of gain, sea clutter and tune
Off Center Function	In Relative Motion, 1/3 or 2/3
Wakes	10s, 30s, 1 min, 5 min & 10 min options
Target Expansion	Operator selectable with 2 levels available
Timed TX	Rotation periods: 10, 20 or 30 scans Repetition periods: 3, 5, 10 or 15 minutes
AIS Overlay	Switch AIS symbols on/off. Display heading/speed vectors and ROT. View detailed AIS data, safety critical target data, ALR and SRM messages. Set up a safe zone.
Weather
Type	SIRIUS Marine Weather
Weather Elements	Storm cast, waves, Canadian radar, lightning, wind, sea surface temperature, observations stations, city weather, NOWRad, storm tracks, surface pressure
Animated Weather Graphics	Weather forecast, weather radar history
Weather Reports	Tropical statements, marine warnings, marine zone forecasts, marine watchbox