A Self-Tailing EVO™ Winch that works at the push of a button!
That’s exactly what you will find with Lewmar’s electric winch range. Lewmar
electric winches are available with 2 levels of control: E series and ELS. Both
are fitted with a series wound motor allowing the sheet to be recovered rapidly
at low load when sheets are slacker, and slows down as load increases. This
provides speed when you need it most, and control as you tune your sails to
perfection removing the need of a 2 speed winch motor. Manual operation is
available as a back up, or to experience traditional sailing.
Features
- Push Button Power
- Quiet operation
- Manual override
- All the benefits of the Evo™ range
- Easy to install
- Inclusive of contactor and motor units
New electric motor includes controller

Lewmar supplies a new motor gearbox with the E-series controller pre-mounted.
This convenient solution removes any complicated wiring for the installer and
keeps the boat looking very tidy.
E-series
The E-series controller is equipped with a thermal trip to monitor the
motor temperature, which ensures a cut out if the heat builds up to an
unacceptable level. Available on the EVO™ electric winch range 40, 45
& 50.
Electric load sensing – ELS
Pioneered by Lewmar, ELS (Electric Load Sensing) electric winches are
controlled by an Overload Protection Control Box, which allows the
winch to be operated up to the safe working load of the specific
winch. Once this load is exceeded, the winch automatically cuts out.
Once the load is reduced to below the safe working load, the winch can
be restarted. The ELS features the additional safety function of a
Motor Thermal Trip, which ensures that the motor cuts out in the event
of excessive heat build up. ELS is available on the EVO™ Electric
Winch Range Size 40 to 80.
A Self-Tailing Evo Winch that works at the push of a button! Thats exactly
what you will find with Lewmars electric winch range.
Available in size 40, 45, 50, 55 and 65
Features
- Push Button Power
- Quiet operation
- Manual override
- All the benefits of the Evo range
- Easy to install
Complete kit includes:Deck unit, motor gearbox, E series
connected to motor, circuit breaker and deck switch.
You can also make your own kit by selecting a deck unit, motor
gearbox, contactor/ control box and the accessories
Notes:
Mounting Instructions
When installing a winch, Lewmar recommends the winch to be mounted on a level
surface and that the rope enters the drum at an angle of 5 to 10 to the base
axis of the winch. This angle can be achieved by using a base wedge when
mounting the winch. Please note that not all mounting holes are symmetrical on
all models.
Weight Alloy |
Weight Chrome |
Mounting instructions |
39.3 lb |
43 lb |
5x1/2in c'sk head screws on 4 3/4in PCD |
Dimensions
Height H(in) |
Line Entry L(in) |
M(in) |
P(in) |
T(in) |
U(in) |
V(in) |
Base Dia B(in) |
6 9/10 |
3 49/64 |
9 25/64 |
1 31/32 |
1 23/64 |
2 3/4 |
2 55/64 |
6 1/16 |
