Analytic 38A, 24V Out, Input 30-45, DC/DC Battery Charger, BCD600-32-24
BCD600 DC Battery Charger
NSN#
BCD600
BENEFITS
- Ultra-Quiet
- Power sensitive electronics without interference
- Rugged & Reliable
- Ensure years of safe and trouble free operation
- Fast & Accurate Charging
The BCD600 battery charger provides up to 600 watts to charge a 12V or 24V
battery system (1 bank) from a 32V or 36V source. The source and the batteries
under charge must share a common ground.
The all-new single board design incorporates state of the art switchmode
technology for unmatched efficiency and ultra-quiet operation. Multiple stages
of filtering reduce radiated or conducted noise to very low levels. The BCD600
Series is capable of charging up to two independent banks of batteries. The two
stage charging profile charges the batteries at a constant current equal to the
maximum continuous output of the unit. When the battery voltages come up to the
float voltage that the unit is set to, the current into the batteries will taper
off as necessary to maintain the batteries at the float voltage.
The unit can be left permanently connected without fear of overcharge or
damage to the batteries. The adjustable float voltage feature allows the unit to
be used for any type of lead-acid battery including lead acid and gel cell.
Available options include a remote control. We are confident that you will get
many years of reliable service from this Battery charger.
Features
- Adjustable output voltage for charging standard or deep cycle lead-acid,
VRLA or Gel cell type battery
- Audible & visual indicators for constant current, low input voltage, low
output voltage & over-temperature
- Extremely rugged and well suited for marine and other demanding
environments
- High tolerance for shock and vibration
- Ultra-quiet low EMI operation
- Current limiting protection
- Short circuit protection
- Reverse input protection
- Output over-voltage crowbar
- Dry contact output fail relay
- Over-temperature shutdown
- Spark-free connection
- Wide-Temperature operation Available
- Conformal coating and/or harsh environment ruggedization available
- Optional portable features for automotive use
- 3 year parts and labour warranty
Applications
- Marine & other Rugged Environments
- Mobile Offices (TV and Radio Vans)
- Automotive / RV / Military
- Electric Utilities and Substations
- Communications Systems
- Industrial Controls
- Field Work / Construction Sites
- Solar / Alternative Power Systems
- Emergency Backup Power (UPS)
- Charge any 12 or 24V Battery System
Electrical [Input]
| Model Number |
BCD600-32-12 |
BCD600-32-24 |
| Input Volts (DC) |
20-45 |
30-45 |
| Input Amps (Max) |
40 |
40 |
| Input Fuse (AGC) |
25A x 2 |
25A x 2 |
| Noise on Input |
< 25 mV |
| Low Input Voltage Alarm |
10.5V |
Electrical [Output]
| Output Nominal (op) |
12 |
24 |
| Output Volts (DC) |
13.6 ? 0.05 |
27.2 ? 0.05 |
| Charging Amps |
50 cont. |
38 cont. |
| Output Adjustment (Vdc) |
? 0.5 |
| Output Crowbar |
16.0 ? 0.5V |
32.0 ? 1.0V |
| Input Fuse (AGC) |
30A x 2 |
25A x 2 |
| Output Ripple & Noise |
< 25 mV |
| Battery Banks |
1 |
| Stage |
2 |
| Battery Size (Amp Hours) |
200-300 |
152-228 |
Regulation
(Line & Load) |
< +/- 0.5% |
| Duty Cycle |
Continuous 100% for 24 hours per day |
| Efficiency |
> 90% @ Maximum Output |
Environmental Specification
| Operating Temp. Range |
-25? to +40?C @ maximum output
Derate Linearly 2.5% per?C from 40?C
(Optional -40?C extra wide temp. operation avail.) |
| Humidity |
0 - 95% Relative Humidity
(non-condensing) with optional conformal coating |
| Audible Noise |
NONE - ?db @ 3 ft |
| Typical Service Life |
>10 years (87,600 hours) |
| Isolation |
Any Input or Output to Case 500 VDC
Input to Output ? Common Negative) |
Mechanical Specification
| Length |
9.1 in / 23.1 cm |
| Width |
7.8 in / 19.8 cm |
| Height |
4.3 in / 10.8 cm |
| Clearance |
1 inch (2.5 cm) all around |
| Material |
Marine Grade Aluminium |
| Finish |
Black Anodize / Powder Epoxy Coat |
| Fastenings |
All 18-8 Stainless Steel |
| Weight |
6.0 lb / 2.7 kg |
| Connections |
#10 AWG Input Wires (Positive & Negative)Four contact output terminals |
| Warranty |
3 years |
| Safety |
Designed to meet CSA 22.2.107.1 & UL458 |
|
WARNING:
This product can expose you to chemicals including Di-n-hexyl Phthalate (DnHP)
which is known to the State of California to cause reproductive harm, and
Vinyl Chloride which is known to the State of California to cause cancer. For
more information go to 
