SI-TEX Vector Pro G2 15 Gyro Compass VECTORG2
|
KODEN Vector Pro GPS Compass |
 |
|
| |
For Mobile Applications
The VECTOR PRO provides heading
information to
insure Radar Image is Overlaid properly on Street Maps
for Most Accurate Presentation! |
| KODEN VECTOR PRO SPECIFICATIONS |
| Receiver Type |
L1, C/A code, with
carrier phase smoothing |
| Channels |
12-channel, parallel
tracking (10 channel when tracking SBAS) |
| Update Rate |
5 Hz position max, 10 Hz
heading max |
| Horizontal Accuracy |
<1 m 95% (DGPS)*, <5m
95% (autonomous, no SA)** |
| Heading Accuracy |
<0.5 degrees rms |
| Rate of Turn |
25º/s max |
| Pitch / Roll Accuracy |
<1 degree rms typical |
| Start-up Time |
<60 s |
| Heading Fix |
<20 s |
| Satellite Reacquistion |
<1 s |
| DIFFERENTIAL BEACON |
| Channels |
2-channel, parallel
tracking |
| Frequency Range |
283.5 to 325 kHz |
| Operating Modes |
Automatic and manual |
| Sensitivity |
2.5 d mV for 6 dB SNR at
200 bps |
| Dynamic Range |
100 dB |
| Adjacent Channel Rejection |
61 dB at + 400 Hz
offset |
| COMMUNICATIONS |
| Serial Ports |
3 full duplex RS-232 and
2 half-duplex RS–422 |
| Isolation |
All serial ports
optically isolated from power supply
|
| Baud Rates |
4800, 9600, 19200 |
| Data I/O Protocol |
NMEA 0183 and SLX binary |
| Correction I/O Protocol |
RTCM SC-104 |
| Timing Output |
IPPS (HCMOS, active
high, rising edge sync, 10 ¥, 10 pF load) |
| IPPS Accuracy |
50 ns |
| NMEA Heading Messages |
GPGGA, GPGLL, GPGSA,
GPGST, GPGSV, GPRMC, GPRRE, GPVTG, GPZDA, RD1,
HEHDT, HEROT |
| ENVIRONMENTAL |
| Operating Temperature |
-30ºC to +70ºC |
| Storage Temperature |
-40ºC to +85ºC |
| Humidity |
100% condensing |
| POWER |
| Input Voltage |
8.0 to 40V DC |
| Isolated |
Power supply isolated
from serial ports |
| Reverse Polarity Protectoin |
Yes (but not reverse
polarity operation) |
| Power Consumption |
<4.5W |
| Current Consumption |
<360 mA at 12.0V DC |
| MECHANICAL |
| Power/Data Connection |
18-pin, Environmentally
sealed |
| Dimensions |
For Pole Mount:
24.4"W x 6"H x 6.3"D, For Fix Mount: 24.4"W x
6.2"H x 6.3" D (not including mounts) |
| Weight |
3.3 lbs. |
|
|
|
|
| |
Specifications subject to change without
notice. |
|
