RMK-10 System Remote Control Portrait Keypad
Remote Keypad is an ultra-compact wired keypad accessory that provides full
control of aSeries, cSeries, eSeries, eS Series and gS Series Multifunction
Displays (MFDs) from any mounting location.
The fully backlit RMK-10 includes dedicated keys for home, menu, zoom in/out,
window control, waypoint management, power/brightness, as well as Evolution
RMK-10 also features the same multifunction rotary controller with the
integrated cursor pad found on eS Series multifunction displays
The RMK-10 can be surface-mounted or flush-mounted, and is available with key
mats for horizontal or vertical installation. This gives you the flexibility
to install the RMK-10 just about anywhere.
Utilising Raymarine’s RayNet high speed networking, the RMK-10 can be setup to
control a single multifunction display, or multiple displays mounted at the
same location. When controlling multiple displays on the same helm, the RMK-10
provides seamless control across all of the displays.
When used with aSeries or gS Series Multitouch displays, the RMK-10 brings
full HybridTouch™ control capability to these products. The RMK-10 integrates
seamlessly with the LightHouse II user interface and allows the navigation
system to be operated solely by touch, by keypad, or any variation between.
The RMK-10 is the perfect solution for controlling MFD’s mounted beyond arm’s
reach, or in overhead electronics boxes. Instead of reaching for the MFD, the
RMK-10 brings the system’s controls to you.
For the ultimate in convenience, mount the RMK-10 in the arm of your favorite
helm chair. Now it’s easy to sit back, relax and enjoy the ride on autopilot,
while still being able to interact with your navigation system.
RMK-10 is also great for bringing remote system control to secondary monitors
and onboard LCD TV sets connected to the VGA or HDMI output of select
e-Series, eS-Series and gS-Series displays. Now you can see and control your
Raymarine navigation system from a below-deck navigation table, salon or
- PoE classClass 1
- Nominal supply voltage12 / 24 V dc
- Operating voltage range10.8V dc to 31.2V dc
- Power consumption3.84W
- Operating temperature-25ºC to +55ºC (-13ºF to 131ºF)
- Storage temperature-30ºC to +70ºC (-22ºF to 158ºF)
- Relative humidityMaximum 75%
- Waterproof ratingIPX6
- Network / power1 x RayNet connector | (gS Series - 1000 Mb/s plus PoE) |
(aSeries , cSeries, eSeries - 100 Mb/s)
- Alternate power1 x power connector