Power Converters (120V AC to 12V DC)
Charles marine power supply - Onboard equipment
such as single side-band radios, radar rectifiers, halogen and other lighting
systems require a constant DC voltage to operate, yet the source does not have
to be batteries. Power supplies may be used to run this equipment.
Newmar Power supply -
Designed for powering 12 and
24 VDC communication/navigation equipment aboard
commercial vessels where reliability is the primary consideration.
Polyurethane conformal coated PC board and corrosion resistant heavy duty
aluminum
case with integral shock mounts assures survival in hostile environments
Analytic Systems' power supplies use Switchmode
technology with powerful IGBT switching transistors for reliability and
efficiency with minimum size. Circuit innovations reduce output ripple to levels
previously available only from bulky and inefficient linear power supplies
|
 |  |  |  | Newmar Integrated Power System (IPS) IPS-12-40

Brand New with Factory Warranty  |  | Newmar 115-12-20A Power Supply 115/230VAC To 12VDC, 20 Amps

Brand New with Factory Warranty  |  |  |  |  |  | Newmar 115-12-35CD Power Supply 115/230VAC To 12VDC,35A Cont

Brand New with Factory Warranty  |  | Newmar 115-12-8 Power Supply 115/230VAC To 12VDC, 8 Amps

Brand New with Factory Warranty  |  |  |  |  |  | Newmar Power PAC 14AH Power Supply

Brand New with Factory Warranty  |  | Newmar Power PAC 7AH Power Supply

Brand New with Factory Warranty  |  |  |  |  |  | Analytic Heavy Duty 60A, 12 V, 110 V AC, 60 Hz, DC Power Supply, PWS1000-110-12

Brand New with Factory Warranty  |  | Analytic Systems AC Power Supply 20/25A, 12V Out, 85-265V In, PWI320-12

Brand New with Factory Warranty  |  |
Newmar Power Supplies
Heavy Duty Power Series
Input: 115/230
VAC
Output: 12
or 24 VDC,
5 – 35 Amps
These super-rugged DC power supplies are ideal for powering 12 and 24 volt
communication/navigation equipment onboard commercial vessels where reliability
is essential. The proven linear circuit design provides pure noise free output
and long service life.
Power-Pac Series
Input: 115/230 VAC
Output: 12 VDC, 5 Amps
Battery Back-up: 7 – 14 A/H
This 12 volt, 10 amp power supply features built-in back-up batteries which are
charged during normal operation and then continue to power radios when AC power
is lost. Choose 7 or 14 amp-hour battery capacity.
Integrated Power System with Internal Batteries
Input: 115/230
VAC
Output: 12,
24, or 48 VDC, 11 – 40 Amps
The Integrated Power System (IPS) is a unique multifunction power supply which
incorporates built-in battery back-up and numerous power accessories within a
single 2RU (3.5″) chassis, thus eliminating time-consuming system integration,
component sourcing and installation, while saving precious rack space–ideal for
12, 24 or 48VDC power applications requiring AC fault tolerant operation such as
GMDSS systems or any critical DC system.
Power Modules
Power Modules function as power supply or battery charger; 12, 24 or 48 volts;
positive, negative floating ground. Wire in parallel to create systems from
500-6,000 watts.
Analytic Power Supplies from Analytic Systems: Power converters, AC to
DC power supply, and more
Rugged and Reliable: Power Supplies from Analytic Systems
Analytic Systems’ Power Supplies use switch-mode technology with
powerful IGBT (insulated-gate bipolar transistor) switching transistors,
ensuring reliability and efficiency at minimal size. In addition, our
Power Supplies feature:
• Circuit innovations to reduce ‘output ripple’ to levels previously
available only from bulky and inefficient linear power supplies
• Reliability features including an input fuse, thermal shutdown,
current limiting and output short circuit protection with automatic
recovery
• An output over-voltage crowbar circuit to protect any powered devices
from excessive voltage should the unit fail
• Single-board PWS Series for ultra-quiet, and the latest generation of
current mode PWM control; also features a four-contact output terminal
(two positive, two negative) for easy connection of devices
• Extra features including adjustable output voltage, over-temperature,
overload and output on.
Our Power Supplies provide 12, 24 or 48 volts DC at power levels from
300 to 1250 watts from a 110 or 220 VAC source. Custom output voltages are
available in all series to meet your needs.
|
|
|