
Analytic 1200W, 20-40V Input, 110 VAC Output, Intelligent Pure Sine Wave Inverter ipsi1200-20-100
BENEFITS
- Proven technology
- Rugged & reliable for years of safe and trouble free operation
- Multiple battery voltages supported by each model
The IPSi Series of 'Intelligent Pure Sinewave' Inverters are designed
specifically for running computers and other sensitive AC loads in rugged mobile
and other off-grid environments.
One standard AC receptacle (circuit breaker protected) plus a dedicated
hardwire connection provide for easy connection of loads. Models are available
for 110 or 220 Volts AC Out at 50 or 60 Hz (user selectable), and to operate
from 11-15, 20-45 or 40-90 Volts DC In to cover all standard DC battery voltages
from 12 to 64 volts nominal (includes 72V Rail).
Using the free to download 'Power Wizard' software, the user can select
output frequency, output voltage and low voltage shutdown parameters from any
laptop through the standard usb interface.
Features
- Pure Sine Wave output – 110 VAC or 220 VAC at 50 or 60 Hz fully regulated
output, exactly the same as household AC
- Hard Wire and Plug-In (NEMA 5-20 or Euro CEE 7/7) AC output connections
standard
- Extra heavy input filtering to eliminate interference with other equipment
sharing the same batteries
- Digital Signal Processor controlled State-of-the art MosFet technology for
efficient and reliable operation
- Toroidal transformer type output to protect computers and other sensitive
equipment from surges and spikes
- ON-OFF switch illuminated by AC output for positive indication of proper
operation
- Thermostatically controlled fan
- Programmable low voltage warning and shutdown to protect the batteries
- Over voltage and over temperature warning and shutdown to protect the
inverter
- Current Limiting and Short circuit protection
- Isolated input for positive or negative ground operation
- Diagnostic LEDs and Audible Alarm
Options
- CANBUS or RS485 communication option
- Remote Digital Display and Control option
- OFF-line UPS option
Electrical [Input]
Nominal (ip) |
12 VDC |
24, 28, 32 OR 26 VDC |
48 or 72 VDC |
Actual (Vdc) |
11 - 15 |
20 - 45 |
40 - 90 |
Input Amps (Max) |
120 |
60 |
30 |
Electrical [Output]
Output Nominal (op) |
110 |
220 |
Output Volts (AC) |
110 ± 10 VAC (user adjustable) |
220 ± 20 VAC (user adjustable) |
Output Amps |
10A (cont) / 12A (peak) |
5A (cont) / 6A (peak) |
Output Frequency |
50.00 or 60.00 Hz ± 0.01 Hz (user selectable) |
Output Distortion |
< 2% at 1200 Watts into resistive load |
Regulation (Line & Load) |
< +/- 2.0% |
Duty Cycle |
Continuous 100% for 24 hours per day |
Efficiency |
>90% @ Maximum Output |
Environmental Specification
Operating Temp. Range |
-25°C to +40°C @ maximum output (-40°C Optional) |
Humidity |
0 - 95% Relative Humidity
(non-condensing) with optional conformal coating |
Audible Noise |
34.5 dB @ 3 ft |
Typical Service Life |
>10 years (87,600 hours) |
Isolation |
Input to Output, Output to Case & Input to Case 1500 VDC |
Mechanical Specification
Length |
13.4 in +/- 0.1in / 33.9cm +/- 0.3cm |
Width |
9.4 in +/- 0.1 in / 23.8 +/- 0.3 cm including mounting flanges |
Height |
7.7 in +/- 0.1 in / 19.6 +/- 0.3 cm |
Clearance |
1 inch (2.5 cm) all around |
Material |
Marine Grade Aluminium |
Finish |
Black Anodize / Powder Epoxy Coat |
Fastenings |
All 18-8 Stainless Steel |
Weight |
30.0 lb / 13.6 kg |
Connections |
DC In – Marathon ST722B2502UH, 175 Amp, 300V Rating c/w Protective Snap
On Cover
AC Out – 1 x NEMA 5-15 receptacle or 1 x 16A 250V CEE 7/7 receptacles with
circuit breaker protection, plus one 30A hardwire connection
AC In – one 30A hardwire connection (with Off-Line UPS Option) |
Warranty |
Three years parts and labour |
|