JRC JLR-7800 GPS Navigator with DGPS Antenna & 15m cable
The new JLR-7500/JLR-7800 (D)GPS navigator will locate your position
accurately and gives you a wide range of possibilities ? integrated with the
latest technologies ? that will enhance your operational performance.
of the new display modes is the 3D highway, which allows you to intuitively
view the location of the next waypoint. This 3D guidance is particularly
valuable to follow a real-time chain of waypoints along a planned route.
SMART ROUTE CALCULATION
The new (D)GPS navigator allows you to plan long distance routes highly
effective. It is possible to set Rhumb lines (RL) for short legs, while Great
Circle (GC) can be set for the long distance legs ? all possible within the same
route. Simply make your selection for each leg to reach your destination
All information is displayed on a highly visible 5.7-inch LCD
display, featuring added sharpness and contrast compared to the previous
version. Many display modes are readily available and selectable from the menu,
such as navigation, CDI, highway, track plotting and service and information
screens. The display has four dim modes, allowing adjusting at your own
The new display design allows you to carry out all operations simply by using
the unified keyboard layout. The keyboard is solid and responsive, which allows
for precise operation. The keys are also backlit, making it easy to operate in
low-light settings on the bridge.
The compact design of the JLR-7500/JLR-7800 incorporates a new intuitive
interface, providing enhanced ergonomics and user friendliness. The logic of the
controls and excellent on-screen menus will greatly shorten most users' learning
KEY IN DATA
With the new (D)GPS navigator, entering data is just as simple
as creating a (SMS) text message on your phone. The consistency in the keyboard
layout allows entering waypoint data fast and in a natural way.
SATELLITE INTEGRITY CHECK
The newly developed sensors includes RAIM, which is to access the integrity
of GPS signals. If multiple satellite signals are picked up, this system will
check if the position fix is consistent with the computed position, assuring
higher reliability than conventional methods.
The (D)GPS navigator integrates four configurable NMEA ports. This advanced
feature will allow you to e.g. have one port configured with the latest NMEA
standard, while another port is capable of running a previous version. In this
way you can connect older equipment onboard. It also has one in and two contact
outputs and LAN, which facilitates route data transfer and/or interswitching.
The display is very compact and can be mounted virtually
anywhere, allowing for a flexible installation approach in confined spaces.
The base of the sensor is designed for an easy installation, either on a pole
or on an extension mast. The base also includes a slot allowing for easy cable
management, significantly reducing installation time.
Up to 10,000 waypoints can be stored in the internal memory.
All waypoints can be named and renamed up to sixteen characters.
You can make 100 routes with 512 waypoints per route, which can be entered
randomly, and there's room for 2000 points for the ship's track and up to 1000
for events and marks.
Via a LAN connection, you can easily connect two displays.
The second display is fully operable and auto synchronises with
the main display, which is directly connected to (D)GPS sensor, allowing e.g.
acknowledging alarm or adjusting waypoints/routes at a secondary location on the
You can also set for a dual installation, having two (D)GPS
sensors connected to two different displays to simply switch when necessary,
assuring you always on.
- 1) Via external temp sensor/echo sounder
- 2) Only JLR-7800
- 3) Via external speed log/current meter
WHAT'S STANDARD IN THE BOX
- (D)GPS sensor
- Installation parts
- Data connector
- Spare parts
1. Including bracket
All specifications are subject to change without notification.