The Original Wishbone Style Outrigger Holder
has been in production for over 45 years. Setting the standard for the industry,
our "Junior" outrigger holder has often been imitated,
but never equaled. Its ease of operation, adjustable fishing angle, ability to
lay down for bridges and small footprint makes it the ideal holder for a
multitude of boats.
Durability was the watchword at its
conception. You won't find plastic parts in this holder. Constructed of heavy
duty brass forgings, heavy wall brass pipe and a stainless steel main tube, it
epitomizes strength and reliability. The three point mounting system provides
maximum strength and distributes the stress to the mounting surface over a wide
area. This holder can be mounted vertically or angled toward the stern.
Somewhere between twenty to thirty five degrees is normal
Our "Junior" design is available in two
sizes, the 2" x 18" Main Tube (OH226S) and the 2" x 36" (OH234S). Model OH226S
is for use with our deluxe 19ft. single spreader poles and non-spreader poles up
to 22ft. For double spreader poles longer then 20ft. we recommend the OH234S.
To deploy the rigger into the fishing
position, simply open the locking gate and loosen the clamp housing. The clamp
housing then slides down the main tube until you either lock it or it meets the
stop collar for a preset fishing position. To lower the unit for passing under
bridges, the locking gate stays closed and the clamp remains locked to the top
of the main tube. The eye bolt is removed, thus separating the clamp housing
from the wishbone. The main tube is then lowered into the supplied lay down hook
Click here for Manual