Newmar ES-4 Elite AC/DC Master Control Panel
Locating all AC and DC
functions on one panel provides a vessel with a central load distribution and
monitoring center. Features
common to all models include:
Complete metering of voltage and current on AC and DC systems. Back-lit analog
meters are standard, digital optional .
AC master breaker(s) with reverse polarity warning light.
Power "on" indicator lights on all circuits.
four battery bank voltage test switch
Deluxe label set (LS-III) included, 206 functions.
Multiple position ground bus bar
Rating 115/230 VAC, 65 VDC
This panel combines AC and DC control into one compact panel.
See list of specifications at bottom of page.
13.7W X 10H X 4 D 10 lbs
(34.8 X 25.4 X 10.2 cm 4.5Kg.)
Large 3 1/2" scale meters
and an ample circuit breaker capacity makes this the panel of choice for
boats in the
Circuit specifications listed at bottom of page.
17W X 12H X 4 D 12 lbs
(43.2 X 30.5 X 10.2 cm 5.5Kg.)
Exceptional yachts require an extraordinary panel which incorporates all the
aspects of the vessel's electrical system. The ES-5 is such a panel. In addition
to its large DC circuit capacity, the AC section includes two load groups and a
source selector switch for two shore power lines and a 15kW generator. Pre-heat
and start-stop controls are standard. additional system capacity can be obtained
by incorporating model ES-6 or ES-7 above.
20" W x 15" H x 6" D 20
(50.8 X 38.1 X 15.2 cm, 9.1Kg.)
Breaker capacity, 12 Installed standard; 2-5A, 3-10A, 4-15A, 3-20A or
30 amp standard 50 amp* optional, plus 6 S.P. branch capacity, 5 installed
standard; 1-10A,15A, 2-20A or specify
Breaker capacity, 16 Installed standard;3-5A, 3-10A, 5-15A, 5-20A or specify
50 amp* standard plus 8S.P. branch capacity,6 installed standard; 1-10A,
3-15A, 2-20A or specify
above with 7.5 kW, three position (Shore-Off-Gen) ship shore selector switch
installed. Special Order Only.
plus 24 breaker capacity, 20 installed standard;3-5A, 4-10A, 7-15A, 6-20A or
groups each consisting of: Master breaker(D.P.) 50 amp*standard plus 10 S.P.
branch capacity, 8 installed standard;2-10A, 3-15A, 3-20A or specify
(For panels used in 230 VAC applications): 50 amp Master OK for use on 230
VAC line-to-line systems. Not for 230 VAC line-to-neutral systems.