| Teleflex Autopilot Components
|
 |  |  |  | Seastar Power Assist with Autopilot Pump, Type 1 (60 cubic inches/min) 12V, PA6010

Brand New with Factory Warranty  |  | Seastar Power Assist with Autopilot Pump, Type 2 (100 cubic inches/min) 12v, PA6020

Brand New with Factory Warranty  |  |  |  |  |  | Seastar Power Assist with Autopilot Pump, Type 1 (60 cubic inches/min) 24V, PA7010

Brand New with Factory Warranty  |  | Seastar Power Assist with Autopilot Pump, Type 2 (100 cubic inches/min) 24V, PA7020

Brand New with Factory Warranty  |  |  |  |  |  | Seastar AP1219 Type 1 12V Pump 60 cubic inches/Min

Brand New with Factory Warranty  |  | Seastar AP1233 Type 2 Pump 12V, 110 cubic inches/Min

Brand New with Factory Warranty  |  |  |  |  |  | Seastar AP2419 Type 1 24V Pump 60 cubic inches/Min

Brand New with Factory Warranty  |  | Seastar AP2433 Type 2 Pump 24V, 110 cubic inches/Min

Brand New with Factory Warranty  |  |  |  |  |  | Seastar AR4502SI Smartstick Rudder Reference For SIMRAD

Brand New with Factory Warranty  |  | Seastar AR4502 Smartstick Rudder Reference Generic

Brand New with Factory Warranty  |  |  |  |  |  | Seastar AR4502RM Smartstick Rudder Reference For Raymarine

Brand New with Factory Warranty  |  | Seastar Fitting Kit (O/B Application) HF5501

Brand New with Factory Warranty  |  |  |  | Seastar Fitting Kit (I/O Application) HF5502

Brand New with Factory Warranty  |  |
INTRODUCTION
Converts manual hydraulic steering for dramatic reduction in steering wheel
torque and at the same time provides a pump for an autopilot installation.
The SeaStar Power Assist Autopilot pump is the standard power assist product
with the addition of a Type 1 or Type 2 autopilot pump. The SeaStar Autopilot
pump is a fixed flow, reversible pump set that uses an internal hydraulic gear
pump, producing very little vibration or noise. It is offered in 12 and 24 volt
configurations, as well as two different pump sizes (type 1 & type 2).
Part # PA6010, PA6020, PA7010 and PA7020
Features
• Autopilot ready – a single installation (i.e. no need to break into system for
install of pump).
• Converts manual hydraulic steering to power steering.
• Dramatic reduction in steering wheel torque.
• Easy installation.
• OEM or Retrofit.
• Simple add on to an existing SeaStar manual system (from 1.4 – 2.4 SeaStar
helm pumps)
• Compatible with power purge system.
• Ignition protected (SAE J-1171).
• ABYC, CE, NMMA, ISO 10592 Approved.
• Replaces other 12 & 24 volt systems

SPECIFICATIONS
TECHNICAL |
Voltage |
12 or 24 Volts |
Fittings |
Compatible with standard SeaStar Hoses (HO51xx etc.) |
Oil Compatibility |
SeaStar Steering Fluid (MIL 5606) |
Weight |
4.9 lbs (2.2kg) |
Autopilot Pump Sizes |
Type 1: 60 in3/min (no load)
Type 2: 100 in3/min (no load) |
Max Pressure |
1000psi |
Typical Current Draw
(Depending on application) |
12V Type 1: 4 – 8 amps |
12V Type 2: 5 – 11 amps |
24V Type 1: 2 – 4 amps |
24V Type 2: 3 – 6 amps |
SEASTAR PA UNIT
COMPLETE WITH PILOT PUMP FITTED |
Std. SPA + Type 1 12V Pump |
Part # |
PA6010 |
Std. SPA + Type 2 12V Pump |
Part # |
PA6020 |
Std. SPA + Type 1 24V Pump |
Part # |
PA7010 |
Std. SPA + Type 2 24V Pump |
Part # |
PA7020 |
WIRE DETAILS |
Length |
24″ |
Gauge |
12 awg |
Connector |
None – Bare Leads |
AUTOPILOT PUMP
CYLINDER CAPACITY |
Type 1 |
4.9 in3 – 12.5 in3 |
Type 2 |
12.5 in3 – 21 in3 |
|
|
|
|