Bright, clear, and easily visible day or night, the IS35 offers a smart
interface to engine data, fuel efficiency, depth history and more. Connected
to your vessel’s NMEA 2000 network, the IS35 automatically detects and
displays the most relevant information available on a series of pre-set and
user-customisable data pages. With an installation cutout matching traditional
analogue gauges, the IS35 is a hassle-free upgrade for any new build or refit.
- Bright, full-colour LCD display
- Simple button-driven menus
- Automatically displays data from NMEA 2000 engines and sensors
- Monitor up to two engines per gauge
- Pre-set pages for engine monitoring, fuel economy, cruising, steering,
and depth history
- Easily customise pages
- Stylish-low-profile design
- Surface or flush-mount
- Single-cable installation
Bright & Clear Colour Display
The IS35 features a 3.5-inch LCD display with clear 320x240-pixel resolution and
bright LED backlight. White ‘day’ mode provides high brightness and contrast for
use in full sunlight, while red ‘night’ mode offers more subtle illumination for
use in low-light conditions.
Easy To Use
Data is displayed on the IS35 as a series of pages, with pre-set pages for
engine monitoring, fuel economy, cruising, steering, and depth history. A simple
four-button interface makes it easy to switch between pages, change brightness
quickly to reflect the conditions, and modify other settings on the go.
Easy To Set Up
When connected to the NMEA 2000 network aboard your boat, the IS35 automatically
detects other connected equipment including engines; fuel flow, engine
temperature, and water pressure sensors; GPS receivers; depth transducers; and
much more. The IS35 automatically displays the most relevant information
available on its pre-set data pages, eliminating the need for a complicated and
time-consuming setup process.
Easy To Install
The IS35 is designed to fit standard 85mm (3 3/8”) circular cut-outs, for direct
replacement of traditional analogue speed or RPM gauges. Surface-mounted, it has
a low 8mm profile, matching the stylish Glass Bridge design of our NSS evo2
multifunction displays. The IS35 can also be flush mounted using an optional
rear-mounting bracket. Electrical installation is simple, with both power and
data over a single NMEA 2000 cable.
Engine Monitoring Page
Monitor critical engine data for one or two engines, including alternator
potential, engine temperature and water pressure, hours used, oil pressure and
temperature, boost pressure, and trim. The IS35 connects to any marine engine
supporting NMEA 2000, and many others via an optional J1939 to NMEA 2000
Fuel Economy Page
An accurate, real-time view of fuel usage helps to identify your optimal
cruising speed and RPM, letting you maximise your engine’s fuel economy and get
the most from your fuel budget. With a compatible engine, fuel flow sensors, and
tank level sensors, the IS35 can display instantaneous fuel flow, fuel used and
remaining, rate of consumption, and fuel economy in miles per gallon.
Dedicated Cruising Page
The IS35’s dedicated cruising page automatically displays the most relevant
information for power boating, based on available engine data and speed sensors.
Central to the display is an analogue-style RPM display, with support for dual
engines. The cruising page also incorporates easy to read bar graphs for trim
setting and engine temperature, and digital displays for speed, depth, fuel
economy, and fuel flow.
Motor Steering Page
A pre-set steering page provides key navigational information from other NMEA
2000 connected instruments including waypoint position, distance, and time to
destination. The IS35’s course deviation indicator (CDI) provides a clear
graphical representation of your boat’s distance from its plotted course.
Depth History Page
When networked with an NMEA 2000 depth transducer, or multifunction display with
built-in echosounder, the IS35 can show a graphical depth history, with digital
displays of current depth and water temperature.
The IS35 is designed to automatically display the most relevant data available
from your vessel’s NMEA 2000 connected engines and sensors. However, you’re free
to customise its pre-set data pages to display your choice of information from
any NMEA 2000-connected devices aboard. Easily create your own pages
incorporating analogue-style gauges, bar graphs, and digital displays, in a
variety of layouts, to suit your needs at the helm.
Download Instructions/Support Material
IS35 Panel Mount Installation Guide (en-us)
IS35 Rear Mount Installation Guide (en-us)