Simrad AP44 VRF High Capacity Autopilot Pack with HS65 GNSS Compass

AP44 VRF High Capacity Autopilot Pack with HS65 GNSS Compass

Optically bonded 4.1-inch colour display

Visibility of heading, course and status information is essential when relying on your autopilot. The AP44 achieves this through a full-colour graphical display that allows for clear presentation of autopilot data and intuitive on-screen menus.

To ensure optimal visibility in all conditions, the AP44s LCD panel is optically bonded to its protective glass covering eliminating the possibility of condensation or fogging within the display. Transflective LCD technology makes use of reflected sunlight to brighten rather than obscure the screen, delivering superior day-time visibility and lower power consumption compared to traditional backlit displays.

Intuitive autopilot control

The point of a dedicated autopilot controller is to enable immediate access to auto-steering functionality, placing key controls within easy reach. Designed with that purpose in mind, the AP44 includes an intuitive interface with just four buttons and a push-to-enter rotary control dial. The rotary controller lets you make both large and small course adjustments with speed and precision, while also making it easy to select on-screen menu options without repeated button-presses.

Simrad Continuum steering technology

Every Simrad steering innovation builds upon a legacy encompassing over sixty years of autopilot development, which continues today at Simrad Yachtings autopilot research hub in Norway. This legacy is exemplified by the Continuum algorithm: the software that drives Simrad steering technology. Continuum brings all those years of research and on-water experience to your helm, for a smart pilot you can trust to take the wheel. Simrad autopilot solutions are available for a wide range of applications, from the smallest recreational boats up to large commercial vessels.

Automated turn patterns

Your Simrad autopilot can do much more than keep you on course. The AP44 gives you easy access to a range of built-in turn patterns designed to assist with fishing, diving, or just making a quick and efficient U-turn. Choose a turn, select port or starboard, and youre away. For more control, customise your turn pattern to execute complex spirals, zigzags, and other useful manoeuvres.

No Drift steering

No Drift mode integrates GPS navigation with auto-steering, using your position to counteract the effects of wind and tide. This lets you maintain a straight track over ground on your current heading, without having to manually set a waypoint or route. To unlock this powerful feature, simply combine the AP44 with an NMEA 2000 connected GPS receiver or compatible Simrad chartplotter.

Depth contour tracking

Network your AP44 autopilot system with a compatible echosounder module to enable depth contour tracking. In this mode, the AP44 will auto-steer to maintain a constant depth of water beneath your boat perfect for following depth contours while fishing or cruising, without having to define complex multi-waypoint routes.

Easy setup with auto tuning

Autopilot installation and commissioning doesnt have to be difficult or time consuming. The AP44 offers automatic tuning to ensure optimal auto-steering performance, with a simple on-screen commissioning process including dockside configuration and sea trial. Automatic compass calibration is available with the Simrad Precision-9 solid-state compass, further simplifying autopilot setup while ensuring heading accuracy.

Low-profile Glass Helm design

Designed to complement Simrad glass helm displays, instruments, and controllers, the AP44 features modern styling with a low surface-mount profile of just eight millimetres. A compact overall footprint enables mounting almost anywhere, while a large display ensures maximum visibility and ease of use.

The AP44 Autopilot Controller combines Simrad Continuum steering technology with a full colour display, intuitive rotary dial and button controls, and modern glass helm styling. Free your hands from the wheel, cruise in comfort, and discover new ways to search for fish; this dedicated controller offers easy access to automated turn patterns, No Drift steering, depth contour tracking, and other advanced pilot features. Connect your chartplotter to add waypoint and route navigation, and enjoy full autopilot control from compatible Simrad displays.

Features:

• Rotary-dial course adjustment with intuitive autopilot control
• Optically bonded 4.1-inch color display
• Easy setup with auto-tuning and calibration
• Simrad Continuum steering technology
• Intuitive autopilot control
• Automated turn patterns
• No Drift steering
• Depth contour tracking
• Low-profile ‘Glass Helm’ design
• Low power consumption
• Certified NMEA 2000® connectivity

Intuitive Autopilot Control

The point of a dedicated autopilot controller is to enable immediate access to auto-steering functionality, placing key controls within easy reach. Designed with that purpose in mind, the AP44 includes an intuitive interface with just four buttons and a push-to-enter rotary control dial.

Automated Turn Patterns

Your Simrad autopilot can do much more than keep you on course. The AP44 gives you easy access to a range of built-in turn patterns designed to assist with fishing, diving, or just making a quick and efficient U-turn.

Simrad Continuum Steering

Every Simrad steering innovation builds upon a legacy encompassing over sixty years of autopilot development, which continues today at Simrad Yachting’s autopilot research hub in Norway.

Easy Setup with Auto-Tuning & Calibration

Autopilot installation and commissioning doesn’t have to be difficult or time-consuming. The AP44 offers automatic tuning to ensure optimal auto-steering performance, with a simple on-screen commissioning process including dockside configuration and sea trial.

NAC-3

The NAC-3 Autopilot Computer is the brain behind your autopilot system. NAC-3 contains the control algorithms developed to helm a yacht across a broad range of weather conditions and sea-states, alongside the electronics needed to operate a hydraulic or mechanical drive unit, while also interfacing with other components, including heading sensors and rudder feedback units. The NAC-3 was designed for boats 10 meters (33 feet) or greater in length and is rated to operate high-current hydraulic drives, mechanical drive units, and solenoid valves with a current rating of 30 Amps continuous (50 Amps peak).

HS65 GNSS Compass

Simplicity of a compass and a GNSS receiver in one. Heading, Rate of Turn, Pitch, Heave, and Roll. Accurate heading based on dual GNSS data, free from magnetic interference. Easy Installation with NMEA2000 connectivity, Heading derived by dead reckoning using accelerometers when the signal is lost. Supports satellite-based augmentation systems (SBAS). Multiple mount options. Unique Selling Points: Heading accuracy without the restriction of magnetic interference to account for. Heading Accuracy of <2° RMS 10Hz ideal for Autopilot and MARPA applications. <90seconds cold start, Dead Reckoning for heading up 3 minutes following loss of satellite data. Position <1 Meter 10Hz Pitch/Roll Accuracy <1.5° RMS Sleek design Backup magnetic compass with <3° RMS* Heave <30CM RMS Supports GPS, GLONASS, Galileo, BEIDOU, QZSS1 Constellation options with SBAS Options for Flush, Raised or Pole mount 640mm/2ft NMEA2000 Fly-lead Low profile mounting adaptor for various installation types.

SteadySteer™ Flow Switch

Smoother steering. Use the helm to control the autopilot for greater ease of use. Steer manually through turns - convenient manual override. Autopilot engages automatically on straight legs. Seamless and intuitive boat control. Fuzz-free autopilot operation for hydraulic steering. Navigate safely with SteadySteer, functionality for autopilot systems that allows boaters to take immediate, manual control of the vessel through turns without having to disengage the autopilot. Coming out of turns, SteadySteer automatically reengages the autopilot once a new heading is established.

Control the Autopilot with the Helm

SteadySteer automatically disengages the autopilot when you turn the vessel manually and then reengages the autopilot when you have established a new heading. No key-presses, no alarms – just turn the helm.

Less Distractions – Just Drive

No need to look at a display or push buttons to change course; merely point the bow to your destination.

In The Box:

• 000-13289-001 - AP44 Controller
• 000-13250-001 - NAC-3 Computer
• 000-16235-001 - HS65 Compass -
• 000-15445-002 - Pump-3
• 000-10760-001 - N2K Autopilot Backbone Starter Kit
• 000-15734-001 - SteadySteer™ Flow Switch
• 000-0119-86 - N2K Cable - 4.5m (15ft)

**The price is subject to change at anytime without any notice.  We are not responsible for any typographical errors.  Any products can be cancelled from sale at any time.

** All Products sold here are Brand New unless specified Otherwise and come with Full Manufacturer's Warranty

WARNING: This product can expose you to chemicals including Di-n-hexyl Phthalate (DnHP) which is known to the State of California to cause reproductive harm, and Vinyl Chloride which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. __________________________________________________________________________________________

__________________________________________________________________________________________