Lenco 9" x 18" Standard Trim Tab Kit

Standard Mount Trim Tab Kits

12-Gauge Blades / 12-Volt Actuators

Boat Length	Length in Meters	Tab Size	Product Number
		4" x 12"	15052-101
14'-18'	4.26-5.48	9" x 9"	15000-101
14'-18'	4.26-5.48	9" x 9" E	15013-101
16'-25'	4.87-7.62	9" x 12"	15001-101
16'-22'	4.87-6.71	9" x 12" E	15014-101
22'-30'	6.70-9.14	9" x 18"	15002-101
26'-40'	7.92-12.19	9" x 24"	15003-101
30'-50'	9.14-15.24	9" x 30"	15004-101
34'-65'	10.36-19.81	9" x 36"	15005-101
38'-75'	11.58-22.86	9" x 40"	15006-101
14'-18'	4.26-5.48	12" x 9" E	15015-101
17'-30'	5.18-9.14	12" x 12"	15007-101
17'-30'	5.18-9.14	12" x 12" E	15016-101
26'-36'	7.92-10.99	12" x 18"	15008-101
26'-36'	7.92-10.99	12" x 18" E	15017-101
30'-44'	9.14-13.41	12" x 24"	15009-101
34'-54'	11.58-21.03	12" x 30"	15010-101
38'-69'	11.58-21.03	12" x 36"	15011-101
42'-79'	12.80-24.07	12" x 40"	15012-101

In the tab size:
� First number represents tab length
� Second number represents tab width at hinge
� E = Edge Mount
The actuator mounts at the trailing edge of the plane, requiring 4" (10.16 cm) less transom height than our standard mount

Lenco Electric Standard Mount Trim Tab Kits make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a large yacht. The Lenco ballscrew design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics.

Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections. Trim Tab blades are 12 Gauge - 304 SS with a 5/8" flared trailing edge and 1/8" diameter hinge pin. Kits include standard actuators with 5/16" SS bolts.

Kit Contents

2 each of 12-gauge stainless steel trim tab blades
2 each of #15054-001 actuator with 6' leads and Deutsch plugs
2 each of #30133-103 20' actuator extension wiring harnesses
2 each of #15085-001 (116) upper mounting brackets with gland seal
2 each of #50014-001 (119) lower mounting brackets
1 each of the Lenco owner�s / installation manual
All necessary stainless steel mounting hardware

Specifications

Lenco Part #: Multiple Part Numbers
Trim Tab Kit: Standard Mount
Blades: 12 Gauge Stainless Steel
Finish: Smooth
Switch Kit: Sold Separately
Class: Fuel Efficient
Compliance: CE Certified
Compatibility: Any Boat
Made in: Stuart, Florida U.S.A.

Brochure

View (pdf)

Part # Description: 1st number = length of tab / 2nd number = hinge width on transom.

OPERATION

The switch is based on the position of the bow. The left side of the switch controls the starboard tab. The right side of the switch controls the port tab. To lower the starboard bow, press the right (starboard) side of the switch where it reads Down. This will lower the port tab. To lower the port bow, press the left (port) side of the switch where it reads Down. This will lower the starboard tab.

The Lenco tactile switch with L.E.D. indicators and retractor is the first switch to integrate a completely waterproof switch with a trim tab indicator.

Built-in retract feature returns tabs to a fully retracted position when power is removed.
2 High intensity L.E.D. indicator displays show the exact position of your trim tabs at all times.
Photo Eye reads ambient light and adjusts the L.E.D. indicator display intensity for optimum viewing in direct sun light.
Backlit key pad graphics for optimum night viewing.
Self-contained sealed key pad
Self-contained sealed control box module
Fade/smudge proof laser engraved graphics
Do-it-yourself wiring. Quick, easy 15 minute installation
Over molded plug & play switch wiring harness connector
Low profile design
No moving parts
Solid state electronic components

The operation of the indicator switch is based on the position of the bow. The left side of the switch controls the starboard tab. The right side of the switch controls the port tab. To lower the starboard bow, press the right (starboard) side of the switch where it reads Down. This will lower the port tab. To lower the port bow, press the left (port) side of the switch where it reads Down. This will lower the starboard tab. The LED displays on the sides of the display will show how far that tab has moved.

When the on/off switch is turned on at the helm the LED displays on the indicator switch will show one up arrow on each side of the switch. This shows that both tabs are fully retracted. While functioning the tabs the LED displays will indicate the position of the tabs by lighting up the further they are pressed Down. As the switch is pressed Up the lights will go out. When power is removed from the switch the tabs will retract from any position before powering down.