The RAA100 is used to adapt commercially available resistive rudder angle
senders to the NMEA 2000® network. This allows you to
observe rudder angle anywhere on the vessel where there is an NMEA 2000®
compatible display such as Maretron's N2KView® vessel
monitoring system, or Maretron's DSM150 / DSM250 color graphics displays.
The RAA100 is compatible with both the American standard (240-33 ohm) and the
European standard (10-180 ohm) resistive senders. In fact, the RAA100 can be
calibrated for any resistance between 0 and 300 ohms.
You can also use the RAA100 with existing analog gauges so you don't have to
give up your existing analog gauges to enjoy the advantages of digitally
networked information.
- Rudder angle
- Rudder order
Documents marked as html* may be translated into other languages (best viewed
in Internet Explorer).

Maretron’s Rudder Angle Adapter (RAA100) allows you to observe the rudder
angle anywhere on the vessel where there is a NMEA 2000 compatible display.

Maretron’s Rudder Angle Adapter (RAA100) allows you to observe the rudder
angle anywhere on the vessel where there is a NMEA 2000 compatible display.