- Garmin GMR18/GMR18HD
- Simrad DX45
- Intellian i3
- KVH TracVision M2/M3
- Raymarine 37STV
- Sea Tel Coastal 14
For Radomes and Small Satcom/TV Antenna
Still the first choice for boat owners the world over, Scanstrut leads the
way with a new generation of Mast Mounts.
Our new, larger mounting foot is stronger, stiffer and now even easier to
Attaches to mast with four swivel feet, matching a variety of mast profiles.
12 point fixing using high quality monel rivets.
Antenna extends only minimum distance from the front of the mast.
Safety Wire Kit
Independently attaches scanner to mast in case an accident damages the
Splash Out & Upgrade to a Self-Levelling Radar Mount
As tested Yachting Monthly, the Self-Levelling Radar Mount is proven to
enhance radar performance.
To find the correct Radar Guard for installation with your Scanstrut Mast
Mount, please see the list below:
SC12 SC25 Radar Guard*
SC16 Not applicable
SC18 SC24 Radar Guard
SC20 SC27 Radar Guard
SC21 SC26 Radar Guard (SC28 Radar Guard**)
M92722 SC27 Radar Guard
M92698 SC28 Radar Guard
* Not compatible with Furuno 19" DRS2D
** Use with Simrad DX60 & Garmin GMR 21 / GMR 41 antennas only
Cable Conduit is supplied in lengths of 1.5m which are easily cut to fit.
Please specify number of lengths required when ordering.
SC33 Up to 14mm (0.5") cables
SC66 Up to 18mm (0.7") cables
Mast Mount Adapter Kit
Fits Z-Spars, Selden, Isomat and Eurospars Masts, may be required for other
square fronted mast profiles.
I have a Garmin GMR 18 dome and I find that it stands out from the mast when
installing with a SC20 Mast Mount. Why is this?
This is because of the mounting footprint of the dome. If you rotate the dome
through 180° before installing then it will solve the problem and the dome will
be installed much closer to the mast.
When setting up the dome, you should be able to note through the chartplotter
which way the dome is facing. Should you have any questions regarding the set up
of the dome, please contact Garmin directly.
I require some replacement mast mount feet is this possible?
You can order a replacement footpack for the product. The part no. is 15001
for all Mast Mounts excluding M92722 (Part no. 15001R).
Can I install onto a Carbon Mast?
Please speak to your rig manufacturer for advice.
Can I install onto a wooden mast?
Yes. However you would not use the rivets as supplied with our Mast Mounts.
Wood screws have been used for installation but they are not recommended.
We would suggest making a stainless steel band to fit around at least half of
the circumference of the mast, rivet the feet to the band and then bolt the band
to the mast with a bolt that passes through the mast.
Please provide technical details of the size and type of pop rivets needed
to fasten the M92698 mount to a sailboat mast. I purchased a used mount and I
need replacement pop rivets, I can purchase Monel and stainless pop rivets
locally, however i need to know exact specs.
We use 4.8mm Monel rivets, 16mm in length but check your mast wall thickness
to be sure 16mm is the right length.
What type of paint is used on the Mast Mount?
We use colour code RAL9016 paint on all Mast Mounts and they have a
professional powder coat finish with an etch primer and top coat.