No Promo Rate can be applied on this item due to
Oversize. Ship via UPS Ground Rate
PRODUCT INFO
For Radomes
Our Self-Levelling Radar Mount range ensures your radar stays level with the
horizon at all times for optimum antenna performance.
As the boat heels or rolls, the radar is kept horizontal preventing target
loss and giving the best possible radar picture.
Features:
Hydraulic Damping
The main levelling unit features a fine tuned damping system which reacts to
major changes in heel angle of the boat. It is entirely maintenance free and no
power is required
Bespoke Mounting Pole
2.5m (8.3’) unique Pole extrusion accommodates two cable channels with a
cover strip to hold cables in place and out of view
360° Adjustable base
The anodised aluminium base gives choice when deciding where you wish to
install the pole mount. Base enables pole to be installed on both sloping
transoms and level decks
Stable Installation
Have confidence in your installation - you are supplied with two support
modules which provide maximum fore / aft and sideways support
Easily Removed
Unscrew base and remove pole for racing or winter storage, leaving just low
profile base on deck
Also available in Mast or Backstay mounted versions.
TECHNICAL SPECIFICATIONS
Marine Grade Materials
Marine grade 316 stainless steel cradle and base plate and finest quality
machined and anodised aluminium pole and head unit – lasts the lifetime of your
yacht
FAQs
My Raymarine dome does not sit level with the boat is at rest – why is this?
Do not worry, your leveller is still working. The dome’s centre of gravity is
off centre resulting in a slight ‘list’ to one side.
Since we became aware of this issue we have offset the holes on the mounting
plate and so the dome will now sit level. The new plate is available to purchase
should you require it, please contact the Scanstrut sales team.
General FAQs
I have some old electronics, how can I work out if they will fit your
products?
If your electronics are not listed in our part number table, please contact
Scanstrut as we may be able to assist with compatibility.
Where can I order this product?
Scanstrut products are available worldwide via our network of distributors.
Visit our ‘Where to Buy’ page to find your local dealer.
Can I see this product installed / on display anywhere?
Scanstrut products are displayed at various boat shows throughout the season.
Click on 'News & Shows' to view the upcoming boat shows.
Alternatively, find your local dealer on our where to buy page and see if
they have a store to visit.
I am upgrading my marine electronics, will I be able to use the same
Scanstrut mount?
It all depends on the electronics you are using - please contact Scanstrut
for further assistance.
What part no. do I require?
To find your part number, use our 'Part Finder'.
How much does the product cost?
Pricing for Scanstrut products is available from our network of distributors.
Contact them directly for your local pricing.
I am from the press and I would like more information / pictures on your
product.
Good news! Contact our marketing team and they will be happy to help.
Click on 'Contact Us' in the menu bar to send your message.
