If a thru-hull flush-style
600W transducer is what you need, the Tilted Element 555T-LTD/12
will accommodate a deadrise angle between 8° and 15°, while the
Tilted Element 555T-LTD/20 is right for hulls with a deadrise
angle of between 16° and 24°. Both of these transducers
compensate for deadrise by angling the element inside the
housing.
The transducer is labeled with an arrow on top of the housing
that should point towards the keel, whether it is installed to
port or starboard. This ensures that the tilted element within
the housing is given the correct orientation.
600 Watts
50/200 kHz
20/6 degree Beam Angles
Stainless Steel Thru Hull with Temperature
30 Foot Cable with 10-Pin Connector