Seastar Power Assist PA1200, 12V (1000 psi Max), PA1200-3
Seastar PA1200-3 12vDC Power Assist Pump with 15ft
Harness
Model: PA1200-3
- ORB Fittings
- Dramatically reduces
steering effort in heavy or high torque applications
- Easy install. Wall or Floor
mount
- OEM or retro-fit
- Simple add-o to an existing
SeaStar steering system (from 1.4 to 2.4 SeaStar helms)
- Compatible w/ power purge
system
- Return to manual in failure
mode
- Suitable for boats w/
multiple engines and rudders, multiple steering stations, and autopilots
- Ignition protected (SAE
J-1171). ABYC, CE, NMMA, ISO 10592 Approved
Specifications
| Voltage |
12V |
| System
Pressure |
1000 psi
MAX |
| Current
Draw |
40 A MAX,
60 A Peak (1 A System Electronics) |
,
Seastar PA1200-3 Power Assit Unit 12/24v with 15ft
Harness
Model: PA1200-3
The marine industry is continually introducing heavier, more powerful outboard
engines. The Dometic SeaStar Steering Power Assist lets you steer these bigger,
faster boats with the same comfort and ease that you'd expect when driving a
car. Recommended for any boat that is 200 hp and above.
The Dometic SeaStar Power Assist Steering System is comprised of two circuits: a
hand operated manual system, which is the control element, and a hydraulic power
pump, which is the working element. The manual system consists of a helm pump
with internal relief and check valves, and a built in reservoir. The power
system is an electronically controlled hydraulic pump that boosts the fluid
being sent from the helm pump to the steering cylinder, resulting in much easier
effort at the wheel.
|
WARNING:
This product can expose you to chemicals including Di-n-hexyl Phthalate (DnHP)
which is known to the State of California to cause reproductive harm, and
Vinyl Chloride which is known to the State of California to cause cancer. For
more information go to 
