Airmar SmartBoat - 4 Input / 4 Run-Detect / 4 Relay, with CAN2 and Serial
The SmartBoat® system is uniquely designed to connect, control, and communicate
sensor data across multiple networks regardless of sensor output protocols and
peripheral types. SmartBoat delivers universal interfaces to the varied sensors
and protocols onboard and provides the ability to control and manage what is
required of each one, including setting alerts, AllowList/BlockList of PGNs,
sensor state controlled actions and more. The system also significantly reduces
the required interface devices, cabling, and labor currently used for
conventional networking systems, saving thousands on every install. Never has
the marine market had such versatility, affordability, and rich support
What Sets SmartBoat Apart?
SmartBoat modules are certified for use with NMEA 2000 networks and designed
specifically for marine applications (IP67 rated). They are the marine
components of AIRMAR’s new SmartFlex™ System products which support multiple
network standards across many markets.
SmartBoat modules all share a common set of features including built-in
wireless networking support and browser-based configuration and management.
Basic models provide highly configurable sensor interface for a wide range of
analog devices and sensors including voltage, current loop sensors, resistive
senders, thermistor, and thermocouple temperature sensors, run detection,
switch detection, relay control. And digital senders such a fuel flow meters,
and engine data are also easily connected.
Advanced models add support for multi-network bridging and management
including multiple NMEA 2000 networks, NMEA 0183 support, and SAE J1939 engine
Digital Fuel Monitor interface using SmartBoat’s exclusive single and dual
chamber models. These CAN based DFM sensors are easily connected to the ASM
and configured using SmartFlex View. Fuel flow data is then available via NMEA
Browser-based interface, SmartFlex View, is accessed from any laptop, tablet,
or mobile device, which features intuitive, menu-driven navigation for set up,
control and management of connected sensors and networks.
Industry leading alerting and automation via SmartFlex Alert, and SmartFlex
Filter provide the ability to directly configure interfaced sensors to report,
alert, and filter data through user programmed parameters.
The SmartBoat System is ideal for boat builders and installers. System
settings are easily saved and cloned for duplication on future installations.
Built-in wireless networking with browser-based configuration and management
Wireless, onboard user interface eliminates the need for proprietary USB
gateways and software.
SmartFlex View embedded configuration software is accessed wirelessly from any
Wi-Fi capable device.
Industry leading, user configurable alerts and automation via built-in
SmartFlex Filter - allows detailed filtering of PGN data across multiple
networks or devices.
Easily save and clone system settings for backup and repeated system
Ideal for new builds, retrofits and enhancing existing NMEA 2000® networks.
CES models include a second CAN interface, serial input, Ethernet and dual USB
Secondary CAN connection can be configured for NMEA 2000®, J1939 to NMEA 2000®
conversion or attaching Digital Sensors.
Serial connection can be used for NMEA0183 to NMEA 2000® or J1709/J1587 to
NMEA 2000® conversion.
Ethernet connection allows modules to be hard-wired to a switch or router for
T2 models add 12 flexible, software-configurable sensor channels for
conversion to industry-standard NMEA 2000® PGNs.
4 user-configurable relay channels allow manual or automatic device control
via the NMEA 2000® network.
4 user-configurable sensor channels accept any combination of current loop,
resistive, thermistor or binary switch inputs.
4 user-configurable run detect channels allow circuit monitoring and reporting
over the NMEA 2000® network.
Comm Method: NMEA
Connection Type: Screw
Country of Origin: USA
Exterior Color: Black
Exterior Color: Black
NMEA 2000 LEN: 10
Waterproof Rating: IP66