|Tune in your HF marine world
Suitable for many vessels
The versatile AT-130 can be used with a variety of vessels, even smaller
boats that cannot use a long antenna element. For example, the AT-130 will
match a 7 m (23 feet) long wire antenna across the marine band in the 1.6 -
27.5 MHz range.
No manual tuning is needed. Just push the [TUNE] switch on an Icom HF marine
transceiver; the AT-130 adjusts the antenna and the transceiver to the
minimum SWR in any frequency on an HF marine band. The AT-130 allows you to
transmit with strong RF output power, and is perfect for maritime mobile
The AT-130 is housed in a durable, completely weather-resistant acrylic case
with rubber gaskets. This allows it to be conveniently installed near the
antenna element base.
For Icom HF marine transceivers
Icom's sophisticated AT-130 easily matches Icom HF marine transceivers. The
AT-130 easily interconnects with an Icom HF marine transceiver. AT-130
installation is simple. No adjustments are necessary. Just connect the
control cable and antenna wire and go!
Improved tuning performance...the tune-up time is less than 3 seconds in any
frequency on an HF marine band. In addition, the AT-130 has 8 convenient
memories to store tuning information. Retuning for a memorized frequency
takes about 1.5 seconds. This allows you quick trouble-free frequency
Low power tune-up
The AT-130 emits very little output power (just 300 mW) during the tuning
process. This reduces the possibility of causing interference to other
stations using the frequency.