Measures 2.825" x 2.825"
Ignition protected - safe for installation aboard
gasoline powered boats
Tactile textures indicate knob position by feel only
Case design allows surface, front panel, or rear panel
mounting
Label with international ON/OFF legends
Ideal for marine or RV applications
Accepts up to 4/0 AWG battery cables
All non-corrosive marine grade metals
Molded in durable reinforced polycarbonate
ICON label set included for circuit identification
Removable knob remains positively retained
3/8"-16 (M10) tin-plated copper studs
for maximum conductivity and corrosion resistance
7/8" long stud length to accept multiple cable
terminals
Isolator cover protects rear contacts
|
Specifications |
| Inrush Rating: 0.25 sec (10
repeats)* |
1,200 Amperes DC |
| Cranking Rating: 9.75 sec (10
repeats)* |
600 Amperes DC |
| Intermittent Rating: 5 min (UL
1107) |
450 Amperes DC |
| Continuous Rating: (UL 1107) |
300 Amperes DC |
| Terminal Stud, Tin-Plated Copper |
3/8"-16 (M10) |
| Torque |
140 in-lbs. |
| Cable Size to Meet Ratings1 |
4/0 AWG |
| Maximum Voltage Rating |
32 Volts DC |
| Cable Clearance For 4/0 AWG Cables |
1.12" (25.4mm) |
| Case Material |
Reinforced Polycarbonate |
 marked |
|
| |
|
|
Agency Specifications |
| UL Listed - UL 1107
electric power switches |
| Meets UL 1500 and
SAE J1171 external ignition protection requirements |
| |
|
| * Blue Sea Systems
Engine Starting Standard |
| 1 Reducing
cable size will reduce current rating |
| |
Click below for
product documentation.
Instructions
Dimensioned Drawing
Sales Sheet # 1
Sales Sheet # 2
CE Certificate
Declaration of Conformity |
WARNING:
This product can expose you to chemicals including Di-n-hexyl Phthalate (DnHP)
which is known to the State of California to cause reproductive harm, and
Vinyl Chloride which is known to the State of California to cause cancer. For
more information go to 
