• 300 Amperes Continuous Rating
• Ignition protected - safe for
installation aboard gasoline powered boats
• Tactile textures indicate knob position by feel only
• Case design allows surface or rear panel mounting
• Accepts up to 4/0 battery cables
• Fits all Perko and Guest low amperage battery switch
hole patterns
• 7/8" stud length to accept multiple
cable terminals
• 3/8" M10 Tin-plated copper studs for
maximum conductivity and corrosion resistance
• Meets American Boat and Yacht Council (ABYC)
requirements for battery switches
|
Specifications |
| Inrush Rating: 0.25 sec (10
repeats)* |
1,500 Amperes DC |
| Cranking Rating: 9.75 sec (10
repeats)* |
600 Amperes DC |
| Intermittent Rating: 5 min (UL
1107) |
525 Amperes DC |
| Continuous Rating: (UL 1107) |
300 Amperes DC |
| Terminal Stud, Tin-Plated Copper |
3/8" (M10) |
| Torque |
140 in-lbs. |
| Cable Size to Meet Ratings1 |
4/0 |
| Voltage Rating |
32 Volts DC Maximum |
| Cable Clearance For 4/0 Cables |
1.10" (28.0mm) |
| Case Material |
Reinforced Polycarbonate |
 marked |
|
| |
|
|
Agency Specifications |
| • UL Listed - UL 1107
electric power switches |
| • Meets UL 1500 and
SAE J1171 external ignition protection requirements |
| |
|
| * Blue Sea Systems
Engine Starting Standard |
| 1 Reducing
cable size will reduce current rating |
Click below for product
documentation.
Instructions
Dimensioned Drawing
Sales Sheet # 1
Sales Sheet # 2
CE Certificate
Declaration of Conformity |
WARNING:
This product can expose you to chemicals including Di-n-hexyl Phthalate (DnHP)
which is known to the State of California to cause reproductive harm, and
Vinyl Chloride which is known to the State of California to cause cancer. For
more information go to 
