Water Booster System - 115V
The Flojet 2840 Series Booster Systems are designed to provide a constant
water pressure of 0 to 40 psi (0.7 to 2.7 bar) and a maximum flow rate of 4.5
gpm at 10 psi (0.7 bar). The pump is fully automatic, with built in inlet
strainer, pressure switch and check valve, and supplies smooth flow from
tricke to full flow. Typical uses include applications where available water
pressure is very low, and fluctuates widely. Easy installation requires only
that the water lines be connected, and the power cord plugged in.
- Integrated pump and tank system
- May be mounted vertically or horizontally
- Flow rates up to 4.5 US Gallons/min.
Kit Consists of:
115V Quad MPU, 4.5 GPM, SW 40, 0.77 gal capacity accumulator tank, plastic
monting board, and pump inlet strainer