Rule Rule-Mate 2000 GPH Fully Automated Bilge Pump, 24V, RM2000A-24
Rule-Mate 2000 GPH 24 Volt Fully Automated Bilge Pump
The Rule-MateŽ 2000 GPH pump consists of a powerful RuleŽ bilge pump and a
highly intelligent circuit board in a single housing. The pump activated when
the water reaches 2-1/2" and automatically shuts off when the pump senses no
water against the impeller, reducing the remaining water to approximately 5/8".
Rule-Mate Bilge pumps have built-in programming that can sense when the pump is
running but not pumping water. This is a very unique feature to bilge pumps
because it protects the pump and the vessel, especially the vessels batteries.
If debris fouls the sensor or the pump becomes air-bound, the pump will stop
running and begin to "check" for water every 2-1/2 minutes. Once the debris is
removed, the pump will revert to its normal operation, turning on when the water
reaches 2-1/2" and shutting off at 5/8".
- 2000 GPH (7570 LPH) at 0' (27.2V)
- All-in-one pump and switch
- Extra long life heavy duty motor
- 1" NPS discharge with 1" AND 1 1/8" screw-on ports
- Three year warranty