Temperature/Humidity Sensor with 24-hour Fan-Aspirated Radiation Shield
Product number: 6832
Add a temperature/humidity sensor with 24-hour fan-aspirated radiation shield
to your Vantage Pro2 system. Use with the Anemometer/Sensor Transmitter Kit
for flexibility in siting options.
Add flexibility in siting options
Site a temperature/humidity sensor where you want it, even if that location
is not ideal for the transmitter, such as within an orchard’s canopy. This
sensor comes with a 25 foot (7.6 meter) cable which allows you to plug it into
an Anemometer/Sensor Transmitter Kit mounted separately from the sensor.
Fan-Aspirated Radiation Shield ensures most accurate readings
Features both temperature and humidity sensors inside a 24-Hour Fan-Aspirated
Radiation Shield. The fan constantly draws air in over the sensor giving you
highly accurate temperature readings even during steep temperature changes such
dusk or dawn. The shield protects the sensors from solar radiation and other
sources of radiated and reflected heat.
Perfect for installations where steep temperature gradients are common and
where winds are low. If your installation does not have steep temperature
gradients or low wind, consider the Temperature/Humidity Sensor with passive
radiation shield (#6830).
Accurate, high performance sensors
The temperature sensor’s accuracy is ±0.5°F (±0,3°C) from -40° to 150°F (-40°
The humidity sensor’s accuracy is ±2%.
Data updates every 10 seconds.
Powerful 24-hour fan
Fan provides aspiration rate of 190 feet/minute in full sun. On battery only,
aspiration rate is 80 feet/minute.
Supercapacitor and back-up batteries keep fan running 24 hours a day.
Motor-driven fan with solar panel and back-up batteries for 24 hour power.
Temperature and humidity sensors with a 25 foot (7,6 meter) cable.
Hardware for mounting on a fence post or pole
Requires a transmitter station, such as the Anemometer/Sensor
Transmitter Kit, and a receiver, such as a wireless Vantage Pro2 console,
Vantage Connect or Weather Envoy.