Phoenix Inverter VE.Direct 12VDC - 1200VA - 120V
Inverters allow you to power domestic equipment - requiring 230V/120V AC - using
'leisure' or 'automotive' batteries rated at 12V, 24V, or 48VDC.
The VE.Direct port can be connected to:
A computer (VE.Direct to USB interface cable needed)
Apple and Android smartphones, tablets, MacBooks, and other devices (VE.Direct
Bluetooth Smart dongle needed)
Low battery voltage alarm trip and reset levels
Low battery voltage cut-off and restart levels
Dynamic cut-off: load dependent cut-off level
Output voltage 210 - 245V
Frequency 50 Hz or 60 Hz
The full bridge plus toroidal transformer topology has proven its reliability
over many years. The inverters are short circuit proof and protected against
overheating, whether due to overload or high ambient temperature.
High start-up power
Needed to start loads such as power converters for LED lamps, halogen lamps, or
When in ECO mode, the inverter will switch to standby when the load decreases
below a preset value (min load: 15W). Once in standby the inverter will switch
on for a short period (adjustable, default: every 2,5 seconds). If the load
exceeds a preset level, the inverter will remain on.
A remote on/off switch can be connected to a two-pole connector, or between
battery plus and the left-hand contact of the two-pole connector.
To transfer the load to another AC source: the automatic transfer switch
For our low power inverters, we recommend our Filax Automatic Transfer Switch.
The Filax features a very short switchover time (less than 20 milliseconds) so
that computers and other electronic equipment will continue to operate without
ECO mode on/off and ECO mode sense level
In- and output voltage, % load, and alarms
DC connection with screw terminals
No special tools needed for installation