Vetus Hydraulic Steering Pump, HTP30, For 10 mm Tubing, with Integral Non Return/Relief Valves, HTP3010R
Hydraulic steering systems
(with axial piston pump)
Careful attention to detail and modern technology enable us to offer truly top
class hydraulic steering systems.
Our hydraulic steering systems consist of a hydraulic pump and cylinder,
connected by means of tubes (copper, steel or nylonJ.
The pump is of the axial piston type, with small pistons inside, which are
directly actuated by the steering wheel; certainly not the cheapest, but the
only good system for safe and reliable hydraulic steering.
The cylinder is of the double-acting type and mounted on a base, allowing it to
swing according to the arc described by the rudder tiller.
The manually operated system creates its hydraulic power through rotation of the
It does not depend on the electric or propulsion system of the boat for its
All parts are manufactured to the highest standards and of the best materials,
for long service life, corrosion resistance and operating efficiency.
Nearly 40 years of experience in this field gives us an undisputed lead over
This is a very simple matter.
All that is required is to connect the pump to the cylinder by means of copper,
steel or nylon tubes.
Once the steering is properly installed, only minimal maintenance is necessary.
These steering pumps are provided with a tilt mechanism,
allowing the steering wheel to be locked in 4 different
positions, over an arc of 3r.
This device ensures that the steering wheel can be adjusted to suit both seated
and standing steering positions. These pumps are supplied with built-in non
return valves and pressure relief valve and feature the same technical
specifications as type HTP steering pumps. This pump is designed for through
bulkhead installation. weight: 12 9/,6 lb.