JRC JUE-251 FleetBroadband 250
The JUE-251 continues the success of its predecessor, featuring
a reliable industry standard interface and an advanced network router in a
All-new above deck equipment (ADE) design
Our company's long experience of design has lead to an all-new
ADE - inside and out. It features a two-axis control and the base of the dome is
carved from one solid piece of aluminum, making it stable and durable.
By adapting to the latest technologies, the size of the antenna
is slightly reduced and has a weight reduction of 40% - while keeping it robust
and easy to install.
No gyro or GPS input is required and it benefits from having no
cable under the antenna inside, which means there is no need for "cable unwrap"
maneuvers to free cable that has become twisted as the device moves to locate
Using the same cable management philosophy as other current JRC Inmarsat
products, a single coax cable is used between ADE and main unit allowing for
Based on 3G standards, FleetBroadband provides constant,
simultaneous access to voice and highspeed data, capable of supporting always-on
broadband connectivity at speeds up to 284kbps and streaming IP data rate of up
It allows users to send and receive SMS messages of up to 160
characters, a feature that is proven popular with crew who are familiar with
texting from their GSM mobiles while on shore.
With JRC's new JUE-251 BDE comes a whole new set of reliable
interfacing, such as a dedicated non SOLAS voice distress port and an integrated
WAN selector between JRC's BDE and other communication devices, which switches
the unit to a secondary network when the primary network is disconnected.
With crew installation possible, you will save on installation charges and
time in port - while keeping the same warranty conditions as before.
Optional junction board
In addition to the standard interface, JRC offers an optional junction board
packed with a range of additional features. It has 4 telephone/ fax lines
(RJ-11), 4 external buzzers, 1 voice distress button , gyro and GPS input,
remote power switch and multi-purpose dry contact ports.
The JUE-251 integrates a blockage setting which allows you to register up to
6 blocking areas such as the radar mast or funnel. When the line of sight to the
satellite coincides with any of the pre registered blocking areas, the operator
can easily recognize that there is a blockage and can take necessary action such
as course change, to restore the connection.
Remote Maintenance System (RMS)(New)
The JUE-251 supports RMS access over a dedicated JRC IP
connection, which allows for remote maintenance of supported equipment via the
Inmarsat satellite link.
Additionally, JRC's new Inmarsat C model, the JUE-87, can be used to poll the
status of the JUE-251 from the shore, should the ships IP data connection be
Advanced web interface(NEW)
The JUE-251 Inmarsat FleetBroadband comes with an advanced web
interface, built in as standard. This dedicated (Windows based) user interface
brings together all operations. Think of it as the hub of your system - view
everything and fully manage all operations with a few clicks.
Below are just a few of the many features available:
Voice distress button(New)
The JUE-251 will support Inmarsat's voice distress service with
an optional voice distress button, connected directly to BDE. A voice distress
call has the priority and pre-emption over any calls on the Inmarsat satellite
network, guaranteed to get through to an appropriate Maritime Rescue
Coordination Center (MRCC). The service is not currently GMDSS compliant .
- PSU cable
- Inspection result
- Installation parts
- Spare fuse for BDE
- ：JUE-251's standard cable is 30m (CFQ-5924A3) and JRC prepared in 15m
(CFQ-5924A15) and 35, 40, 45, 50m (CFQ-3922Ax), 70 and 100m (CFQ-3923Ax).
- ：Between CFQ-3922A/3923A and BDE.
- ：In case of connecting CFQ-3922A/3923A cable to ADE.
＊1：Gyro interface required when gyro signal is SYNC or