Newmar Pi-10 Handset
The Phone-Com intercom system provides direct, wired,
point-to-point communication anywhere on the vessel. Voice contact to any phone
in the system is as easy as lifting the receiver and pressing the call button.
Phone-Com operates on 12 VDC. They are constructed of high-impact plastic and
are available in either bright white or traditional black. Bulkhead mounting
bracket is provided. Two versions are available:
for communication between only two points. A single call button sounds a buzzer
and illuminates an indicator lamp on the companion phone. Available singly or as
a set with 40' of interconnect wire, fuse, terminal lugs and mounting hardware.
multiple station calling capability. Up to 10 phones may be interconnected, and
each phone has 10 call buttons. Sold individually-- see wiring requirements
Color-coded multi-conductor interconnect wire (22 AWG) is available from NEWMAR
at any length desired with 5, 10 or 15 conductors. For PI-2, use 5 conductor
wire. For PI-10, add 3 to the total number of stations to determine minimum
number of conductors required.
Note: Phones are not waterproof and should
be installed in a protected location.
Two station phone with single call button; sold individually; 2 lbs.
PI-2 SET: Two
station phone set, 40' interconnect wire, fuse, lugs, mounting hardware; 5
Multi-station phone with 10 call buttons, sold individually; 2 lbs.
22 AWG Wire:
5, 10 or 15 conductor; sold per foot.
External buzzer for use in high-noise areas, 1 lb.