Raymarine Type 1 Linear Drive 12V, M81130
Raymarine Mechanical Linear Drives
|
Our most commonly used drive types for sailing vessels.
Raymarine mechanical linear drives provide powerful thrust, fast hard-over
times and quiet operation. Mounted below decks, the linear drive moves the
rudder directly by pushing the tiller arm or a rudder quadrant.
A linear drive unit connects to the rudder stock via an independent tiller
arm. Accessory fittings from your steering manufacturer may be required.
Must be able to back-drive steering system from the rudder. |
| |
Mechanical Linear Drive |
| |
|
|
|
|
Drive Type |
Type 1
12V: M81130 |
Type 2 Short
12V: M81131
24V: M81133 |
Type 2 Long
12V: M81132
24V: M81134 |
|
Maximum boat displacement |
11,000 kg
(24,000 lb) |
15,000 kg
(33,000 lb) |
20,000 kg
(44,000 lb) |
|
Peak thrust |
295 kg (650 lb) |
480 kg (1,050 lb) |
480 kg (1,050 lb) |
|
Maximum stroke |
300 mm (12") |
300 mm (12") |
400 mm (16") |
|
Hard-over to hard-over times |
11 seconds |
11 seconds |
14 seconds |
|
Maximum rudder torque |
735 nm
(6,500 lb.in) |
1,190 nm
(10,500 lb.in) |
1,660 nm
(14,700 lb.in) |
|
Power consumption |
18-36 W |
48-72 W |
48-72 W |
|
Corepack used |
ACU-200 |
ACU-400 |
ACU-400 |
Notes:
- A linear drive unit connects to the rudder stock via an independent
tiller arm. Accessory fittings from your steering system manufacturer may
be required.
- An authorised Raymarine dealer is best suited for installing a linear
drive system.
- Must be able to back-drive steering system from the rudder.
|
Manuals
Mechanical Linear Drive (M81130, M81131, M81132, M81133, M81134)
Installation instructions 81175-7-EN.pdf
|
WARNING:
This product can expose you to chemicals including Di-n-hexyl Phthalate (DnHP)
which is known to the State of California to cause reproductive harm, and
Vinyl Chloride which is known to the State of California to cause cancer. For
more information go to 
