Marine Battery Charger
Xantrex battery chargers are micro-processor controlled for fast,
accurate charging of vehicle or boat batteries in deep cycle or maintenance
applications. Xantrex battery chargers are compact, light weight and easy to
install. These chargers feature multi-stage, power factor corrected charging
meaning that they require less AC input power than traditional chargers to
operate at its peak efficiency. This results in more AC power available for
connected AC loads on vessel or vehicle.
Xantrex TRUECharge™2 Battery Chargers lead the industry with a
small footprint and ultra-compact design. Designed for marine and commercial
applications worldwide, the new TRUECharge2 charger is the latest addition to
the TRUECharge2 series.
Newmar Battery Charger
Phase Three Series Battery Chargers: 12V
Input: 115/230 VAC
Output: 7 – 80 Amps
“Smart” battery charging technology for 12 volt systems aboard
marine applications including workboats, military vessels, commercial vessels,
and recreational craft. These chargers interact with batteries providing the
optimum three stage charge process for fast recovery and conditioning,
maximizing performance and extending battery life.
Series Battery Chargers: 24 & 32V
Output: 8 – 95 Amps
charging technology for 24 and 32 volt systems aboard marine applications
including workboats, military vessels, commercial vessels, and recreational
craft. These chargers interact with batteries providing the optimum three stage
charge process for fast recovery and conditioning, maximizing performance and
extending battery life.
Modular & Programmable Series Battery Chargers: 24V
Output: 100 – 150 Amps
The PTMP represents a new level of functionality, reliability,
and serviceability in very smart battery charging for critical 24 volt systems
aboard work boats, military, commercial, and recreational craft. A menu of
pre-programmed battery type charge profiles as well as custom settings option
allow user to select or program optimal three step charging voltages and
operating parameters. The chargers interact with batteries providing the ideal
profile for replenishment and conditioning, resulting in maximum performance and
extending service life.
Modular Series Battery Charger: 24V
Output: 67 Amps
The PTM charger
provides a significant improvement in system reliability, for critical marine
applications, by utilizing multiple independent charger modules that plug into
the unit, and should a fault occur in one module, the system continues to
operate, thus is considered “fault tolerant”.
Charger Monitor/Control Unit
installation in conjunction with most models of PT Battery Chargers, this unit
provides additional functionality of monitoring, control, and alarms. It
contains a Digital DC volt meter with 3 battery bank sense selector, a dial that
adjusts the PT charger float voltage, and AC Master circuit breaker for control
and protection of charger input power.
Battery Charger: 12V
Output: 6 Amps
The ABC Series
chargers utilize time tested SCR charging circuitry, individually sensing and
regulating each of 2 isolated battery banks, allowing the user to leave the
charger operating indefinitely, even under no-load conditions without fear of
overcharging. These chargers are ideal for vessels or vehicles which have an
intermittent demand for battery power.
ProNauticP Dry Mount Marine
Industry recognized with the 2010 IBEX Innovation Award,
ProNauticP employs our Generation 3 ProMar Digital Performance Charging
Platform which combines all digital control and softwarebased power conversion
technology with global energy management features. ProNauticP addresses the
trend of incorporating and using more 12-volt electronics onboard today’s
power, sail, cruising and sport fishing boats. Boasting twelve
digitally-controlled performance charging profiles with finger tip selection,
ProNauticP fully charges, conditions, maintains and re-conditions batteries
while extending battery life and maximizing battery reserve power performance.